JA1-B3-10-2 — RESISTOR,FIXED,FILM

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

JA1-B3-10-2: RESISTOR,FIXED,FILM.

The RESISTOR,FIXED,FILM is a the manufacturer industrial component. Key specifications include material: PLASTIC CASE, body_style: SINGLE POLE TYPE, body_width: 0.745 INCHES MINIMUM AND 0.755 INCHES MAXIMUM IN, body_length: 1.985 INCHES MINIMUM AND 2.015 INCHES MAXIMUM IN, boss_height: 0.125 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN, reset_method: MANUAL. This part is cataloged in the U.S.

Government catalog under NSN 5905-00-488-3261, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ JA1-B3-10-2

NSN: 5905-00-488-3261
NIINs: 004883261, 011124404
FSC: 5905 — Resistor
CAGE: 74193 — EATON CORP HEINEMANN PRODUCTS COMMERCIAL CONTROLS DIV (USA)

SPECIFICATIONS

material	PLASTIC CASE
body_style	SINGLE POLE TYPE
body_width	0.745 INCHES MINIMUM AND 0.755 INCHES MAXIMUM IN
body_length	1.985 INCHES MINIMUM AND 2.015 INCHES MAXIMUM IN
boss_height	0.125 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
reset_method	MANUAL
storage_type	GENERAL PURPOSE WAREHOUSE
body_diameter	0.188 INCHES NOMINAL IN
pole_quantity	1
terminal_type	WIRE LEAD
inclosure_type	ENCAPSULATED
fragility_factor	MODERATELY RUGGED
NSN	5905-00-488-3261

COMPONENT DIAGRAM

KEY FEATURES

•

RESISTANCE TOLERANCE IN PERCENT: -1.000 TO 1.000

•

TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS: -100.0 TO 100.0

•

BODY DIAMETER: 0.188 INCHES NOMINAL IN

•

ELECTRICAL RESISTANCE: 124.000 KILOHMS

•

INCLOSURE TYPE: ENCAPSULATED

•

TERMINAL TYPE: WIRE LEAD

•

TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS: -55.0 TO 175.0

•

STYLE DESIGNATOR: AXIAL TERMINAL EACH END

TECHNICAL CHARACTERISTICS

RESISTANCE TOLERANCE IN PERCENT	-1.000 TO 1.000
TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS	-100.0 TO 100.0
BODY DIAMETER	0.188 INCHES NOMINAL IN
ELECTRICAL RESISTANCE	124.000 KILOHMS
INCLOSURE TYPE	ENCAPSULATED
TERMINAL TYPE	WIRE LEAD
TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS	-55.0 TO 175.0
STYLE DESIGNATOR	AXIAL TERMINAL EACH END
RELIABILITY FAILURE RATE LEVEL IN PERCENT	0.001
POWER DISSIPATION RATING IN WATTS	0.250 FREE AIR

SUBSTITUTES & CROSS-REFERENCES 9

416435-1027Reference document

Same NSN cross-reference

Reference document — Replaced / superseded reference

RNC65K1243FSSame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

RNR65K1243FSReference document

Same NSN cross-reference

Reference document — Replaced / superseded reference

MIL-R-10509/2Reference document

Same NSN cross-reference

Reference document — Replaced / superseded reference

MILR55182-5Reference document

Same NSN cross-reference

Reference document — Secondary reference

RN65D1243FReference document

Same NSN cross-reference

Reference document — Replaced / superseded reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy JA1-B3-10-2?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is JA1-B3-10-2?

JA1-B3-10-2 is a RESISTOR,FIXED,FILM. It is classified as a MRO (MRO_GENERAL).

What parts can replace JA1-B3-10-2?

There are 9 known substitutes for JA1-B3-10-2: 416435-1027, RNC65K1243FS, RNR65K1243FS and 6 more. Substitute compatibility should be verified for your specific system.

What is the NSN for JA1-B3-10-2?

JA1-B3-10-2 is cataloged in the U.S. Government catalog under NSN 5905-00-488-3261. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

JA1-B3-10-2 — RESISTOR,FIXED,FILM

Request a Quote — JA1-B3-10-2