PartsTable
Technical Data Sheet
Download PDF

J9706S — BOLT,ASSEMBLED WASHER

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

J9706S: BOLT,ASSEMBLED WASHER.

The BOLT,ASSEMBLED WASHER is a the manufacturer industrial component. Key specifications include head_height: 0.421 INCHES NOMINAL IN, thread_class: 2A A, thread_length: 3.000 INCHES NOMINAL IN, fastener_length: 6.000 INCHES NOMINAL IN, surface_treatment: ZINC OVERALL, width_between_flats: 0.937 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5306-00-395-1328, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
J9706S
NSN: 5306-00-395-1328
FSC: 5306 — Bolts
CAGE: 74999 — JOSLYN CORP (USA)
SPECIFICATIONS
head_height0.421 INCHES NOMINAL IN
thread_class2A A
thread_length3.000 INCHES NOMINAL IN
fastener_length6.000 INCHES NOMINAL IN
surface_treatmentZINC OVERALL
width_between_flats0.937 INCHES NOMINAL IN
extended_washer_diameter2.250 INCHES NOMINAL IN
extended_washer_thickness0.187 INCHES NOMINAL IN
NSN5306-00-395-1328
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: J9706S · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
EXTENDED WASHER THICKNESS: 0.187 INCHES NOMINAL IN
•
HEAD HEIGHT: 0.421 INCHES NOMINAL IN
•
FASTENER LENGTH: 6.000 INCHES NOMINAL IN
•
EXTENDED WASHER DIAMETER: 2.250 INCHES NOMINAL IN
•
THREAD LENGTH: 3.000 INCHES NOMINAL IN
•
WIDTH BETWEEN FLATS: 0.937 INCHES NOMINAL IN
•
SURFACE TREATMENT: ZINC OVERALL
•
THREAD CLASS: 2A A
TECHNICAL CHARACTERISTICS
EXTENDED WASHER THICKNESS0.187 INCHES NOMINAL IN
HEAD HEIGHT0.421 INCHES NOMINAL IN
FASTENER LENGTH6.000 INCHES NOMINAL IN
EXTENDED WASHER DIAMETER2.250 INCHES NOMINAL IN
THREAD LENGTH3.000 INCHES NOMINAL IN
WIDTH BETWEEN FLATS0.937 INCHES NOMINAL IN
SURFACE TREATMENTZINC OVERALL
THREAD CLASS2A A
OTHER ITEMS IN FSC 5306 — Bolts
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5306-00-001-1276 5306-00-001-1949 5306-00-001-1988 5306-00-001-1989 5306-00-001-1990 5306-00-001-1991 5306-00-001-1993 5306-00-001-2017
SUBSTITUTES & CROSS-REFERENCES 1
4162SNReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy J9706S?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is J9706S?
J9706S is a BOLT,ASSEMBLED WASHER.
What parts can replace J9706S?
There is 1 known substitute for J9706S: 4162SN. Substitute compatibility should be verified for your specific system.
What is the NSN for J9706S?
J9706S is cataloged in the U.S. Government catalog under NSN 5306-00-395-1328. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — J9706S