PartsTable
Technical Data Sheet
Download PDF

J95073-B2 — ACTUATOR,HYDRAULIC-PNEUMATIC,LIN

✓ Government record, cited
— · GATE VALVE
PRODUCT OVERVIEW

J95073-B2: ACTUATOR,HYDRAULIC-PNEUMATIC,LIN.

ACTUATOR,HYDRAULIC-PNEUMATIC,LIN. Key specifications include temp_rating: -40.0 FAHRENHEIT DEGF, overall_width: 6.880 INCHES NOMINAL IN, overall_height: 16.440 INCHES NOMINAL IN, pressure_rating: 150.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LBS, design_characteristics: DOUBLE ACTING TWIN CYLINDER, end_item_identification: E/I 02XN2 GEN PLA; W/S CODE NIMITZ CLASS CVN. This part is cataloged in the U.S.

Government catalog under NSN 4810-01-467-2415, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
J95073-B2
NSN: 4810-01-467-2415
FSC: 4810 — Valves, Powered
CAGE: 96101 — GAS EQUIPMENT ENGINEERING CORPORATION, THE DBA GEECO (USA)
SPECIFICATIONS
temp_rating-40.0 FAHRENHEIT DEGF
overall_width6.880 INCHES NOMINAL IN
overall_height16.440 INCHES NOMINAL IN
pressure_rating150.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LBS
design_characteristicsDOUBLE ACTING TWIN CYLINDER
end_item_identificationE/I 02XN2 GEN PLA; W/S CODE NIMITZ CLASS CVN
integral_valve_operation_methodHYDRAULIC OR PNEUMATIC
NSN4810-01-467-2415
COMPONENT DIAGRAM
GATE VALVE — FULL OPEN OR FULL CLOSE ONLY Rising STEM BONNET FLOW → → FLOW SEATS — — SIZE: — · — · — PN: J95073-B2 · OEM ⚠ VERIFY BEFORE ORDERING Gate valves = FULL OPEN or FULL CLOSE only — never throttle. Partial opening causes seat erosion and vibration. ✓ BROKER TIP Rising stem shows valve position visually — easier maintenance. Non-rising stem saves headroom. PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PRESSURE RATING: 150.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LBS
•
TEMP RATING: -40.0 FAHRENHEIT DEGF
•
DESIGN CHARACTERISTICS: DOUBLE ACTING TWIN CYLINDER
•
INTEGRAL VALVE OPERATION METHOD: HYDRAULIC OR PNEUMATIC
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT16.440 INCHES NOMINAL IN
PRESSURE RATING150.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LBS
TEMP RATING-40.0 FAHRENHEIT DEGF
TEMP RATING180.0 FAHRENHEIT DEGF
DESIGN CHARACTERISTICSDOUBLE ACTING TWIN CYLINDER
OVERALL WIDTH6.880 INCHES NOMINAL IN
END ITEM IDENTIFICATIONE/I 02XN2 GEN PLA; W/S CODE NIMITZ CLASS CVN
INTEGRAL VALVE OPERATION METHODHYDRAULIC OR PNEUMATIC
SUBSTITUTES & CROSS-REFERENCES 5
D844-1001E ITEM B2Reference document
Same NSN cross-reference
Reference document — Secondary reference
585-24Reference document
Same NSN cross-reference
Reference document — Secondary reference
585-24, SIZE 25Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
D844-1001Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
19A3017Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy J95073-B2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is J95073-B2?
J95073-B2 is a ACTUATOR,HYDRAULIC-PNEUMATIC,LIN.
What parts can replace J95073-B2?
There are 5 known substitutes for J95073-B2: D844-1001E ITEM B2, 585-24, 585-24, SIZE 25 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for J95073-B2?
J95073-B2 is cataloged in the U.S. Government catalog under NSN 4810-01-467-2415. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — J95073-B2