PartsTable
Technical Data Sheet
PartsTable / COMPONENT / J70L02AS3
J70L02AS3 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 15.00 MILLIMETERS NOMINAL MM, contact_angle: 25.0 DEGREES MAXIMUM, overall_width: 9.00 MILLIMETERS NOMINAL MM, load_direction: ANGULAR. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-585-9015, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
J70L02AS3
NSN: 3110-00-585-9015
FSC: 3110
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter15.00 MILLIMETERS NOMINAL MM
contact_angle25.0 DEGREES MAXIMUM
overall_width9.00 MILLIMETERS NOMINAL MM
load_directionANGULAR
surface_finishGROUND
shield_quantity1
special_featuresBEARING TO BE SHIPPED DRY OF LUBRICATION; SNAP ON INNER RING; BORE AND OD TO BE CLASSIFIED TO NEAREST 0.0001 IN. IN
style_designatorCOUNTERBORED OUTER RING, NON-SEPARABLE
internal_clearance0.0012 INCHES MINIMUM RADIAL AND 0.0016 INCHES MAXIMUM RADIAL IN
overall_outside_diameter32.00 MILLIMETERS NOMINAL MM
NSN3110-00-585-9015
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: J70L02AS3 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CONTACT ANGLE: 25.0 DEGREES MAXIMUM
•
OVERALL OUTSIDE DIAMETER: 32.00 MILLIMETERS NOMINAL MM
•
BORE SHAPE: STRAIGHT
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: COUNTERBORED OUTER RING, NON-SEPARABLE
•
SHIELD QUANTITY: 1
TECHNICAL CHARACTERISTICS (FLIS)
CONTACT ANGLE25.0 DEGREES MAXIMUM
OVERALL OUTSIDE DIAMETER32.00 MILLIMETERS NOMINAL MM
BORE SHAPESTRAIGHT
OVERALL WIDTH9.00 MILLIMETERS NOMINAL MM
MATERIALSTEEL OVERALL
STYLE DESIGNATORCOUNTERBORED OUTER RING, NON-SEPARABLE
SHIELD QUANTITY1
SPECIAL FEATURESBEARING TO BE SHIPPED DRY OF LUBRICATION; SNAP ON INNER RING; BORE AND OD TO BE CLASSIFIED TO NEAREST 0.0001 IN. IN
RETAINER FABRICATION METHODPRESSED
SURFACE FINISHGROUND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
200185Interchangeable
interchangeable cross-reference
interchangeable
45D18Interchangeable
interchangeable cross-reference
interchangeable
37Interchangeable
interchangeable cross-reference
interchangeable
R7Interchangeable
interchangeable cross-reference
interchangeable
R7YInterchangeable
interchangeable cross-reference
interchangeable
12001P11Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy J70L02AS3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is J70L02AS3?
J70L02AS3 is a BEARING,BALL,ANNULAR.
What parts can replace J70L02AS3?
There are 11 known substitutes for J70L02AS3: 200185, 45D18, 37 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for J70L02AS3?
J70L02AS3 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-585-9015. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — J70L02AS3

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026