PartsTable
Technical Data Sheet
Download PDF

J702 — RELAY,ELECTROMAGNETIC

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

J702: RELAY,ELECTROMAGNETIC.

The RELAY,ELECTROMAGNETIC is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, duty_type: CONTINUOUS, temp_rating: -65.0 FAHRENHEIT AND 160.0 FAHRENHEIT DEGF, overall_width: 3.290 INCHES NOMINAL IN, overall_height: 3.030 INCHES NOMINAL IN, overall_length: 4.030 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-194-3721, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
J702
NSN: 5331-00-194-3721
NIINs: 001943721, 005029052
FSC: 5331 — O-ring
CAGE: 43952 — ENERGY SERVICES GROUP DIV OF COOPER INDUSTRIES INC (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
duty_typeCONTINUOUS
temp_rating-65.0 FAHRENHEIT AND 160.0 FAHRENHEIT DEGF
coil_quantity1
overall_width3.290 INCHES NOMINAL IN
overall_height3.030 INCHES NOMINAL IN
overall_length4.030 INCHES NOMINAL IN
winding_quantity2
center_hole_diameter2.710 INCHES MINIMUM AND 2.740 INCHES MAXIMUM IN
cross-sectional_height0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
winding_dc_resistance_rating25.8 OHMS NOMINAL SINGLE WINDING
main_contact_maximum_voltage_rating_in_volts40.0 DC
NSN5331-00-194-3721
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: J702 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -65.0 FAHRENHEIT AND 160.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL HEIGHT: 0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 2.710 INCHES MINIMUM AND 2.740 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS
TEMP RATING-65.0 FAHRENHEIT AND 160.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
CENTER HOLE DIAMETER2.710 INCHES MINIMUM AND 2.740 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
SUBSTITUTES & CROSS-REFERENCES 9
AN6227B38Reference document
Same NSN cross-reference
Reference document — Secondary reference
HN4PC16Reference document
Same NSN cross-reference
Reference document — Secondary reference
4279-167PC39Reference document
Same NSN cross-reference
Reference document — Secondary reference
100A10-38Reference document
Same NSN cross-reference
Reference document — Secondary reference
AN6227-38Reference document
Same NSN cross-reference
Reference document — Identification reference
AN6227BPC43Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy J702?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is J702?
J702 is a RELAY,ELECTROMAGNETIC.
What parts can replace J702?
There are 9 known substitutes for J702: AN6227B38, HN4PC16, 4279-167PC39 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for J702?
J702 is cataloged in the U.S. Government catalog under NSN 5331-00-194-3721. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — J702