PartsTable
Technical Data Sheet
PartsTable / COMPONENT / J5425-236
J5425-236 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BUMPER is a the manufacturer industrial component. Key specifications include material: STEEL AND RUBBER NATURAL, thread_size: 1/2-13, shank_length: 1.000 INCHES NOMINAL IN, overall_height: 2.310 INCHES NOMINAL IN, style_designator: FLAT RECESSED TOP THREADED STUD, outside/top_flange_diameter: 3.129 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-048-0464, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
J5425-236
NSN: 5340-01-048-0464
FSC: 5340
CAGE: 76005 — LORD CORPORATION DBA LORD CORP (USA)
SPECIFICATIONS
materialSTEEL AND RUBBER NATURAL
thread_size1/2-13
shank_length1.000 INCHES NOMINAL IN
overall_height2.310 INCHES NOMINAL IN
style_designatorFLAT RECESSED TOP THREADED STUD
outside/top_flange_diameter3.129 INCHES NOMINAL IN
material_document_and_classificationSTEEL 1010 ASSN STD SINGLE MATERIAL RESPONSE
NSN5340-01-048-0464
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: J5425-236 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL AND RUBBER NATURAL
•
MATERIAL DOCUMENT AND CLASSIFICATION: STEEL 1010 ASSN STD SINGLE MATERIAL RESPONSE
•
OUTSIDE/TOP FLANGE DIAMETER: 3.129 INCHES NOMINAL IN
•
STYLE DESIGNATOR: FLAT RECESSED TOP THREADED STUD
•
THREAD SIZE: 1/2-13
•
SHANK LENGTH: 1.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL AND RUBBER NATURAL
MATERIAL DOCUMENT AND CLASSIFICATIONSTEEL 1010 ASSN STD SINGLE MATERIAL RESPONSE
OUTSIDE/TOP FLANGE DIAMETER3.129 INCHES NOMINAL IN
STYLE DESIGNATORFLAT RECESSED TOP THREADED STUD
THREAD SIZE1/2-13
SHANK LENGTH1.000 INCHES NOMINAL IN
OVERALL HEIGHT2.310 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
725193Interchangeable
interchangeable cross-reference
interchangeable
F411-CM650Interchangeable
interchangeable cross-reference
interchangeable
3876017-2Interchangeable
interchangeable cross-reference
interchangeable
10173032Interchangeable
interchangeable cross-reference
interchangeable
40204-00Interchangeable
interchangeable cross-reference
interchangeable
GB815K1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy J5425-236?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is J5425-236?
J5425-236 is a BUMPER.
What parts can replace J5425-236?
There are 7 known substitutes for J5425-236: 725193, F411-CM650, 3876017-2 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for J5425-236?
J5425-236 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-048-0464. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — J5425-236

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026