PartsTable
Technical Data Sheet
Download PDF

J515HK178X0124H — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

J515HK178X0124H: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: FLUOROCARBON RUBBER, temp_rating: -15.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF, special_features: 90 DUROMETER HARDNESS OVERALL, center_hole_diameter: 12.29 MILLIMETERS MINIMUM AND 12.55 MILLIMETERS MAXIMUM MM, cross-sectional_height: 1.70 MILLIMETERS MINIMUM AND 1.86 MILLIMETERS MAXIMUM MM, specification/standard_data: 0U583-SAE J515 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-650-3431, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
J515HK178X0124H
NSN: 5331-01-650-3431
NIINs: 016503431, 016969904
FSC: 5331 — O-ring
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
materialFLUOROCARBON RUBBER
temp_rating-15.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
special_features90 DUROMETER HARDNESS OVERALL
center_hole_diameter12.29 MILLIMETERS MINIMUM AND 12.55 MILLIMETERS MAXIMUM MM
cross-sectional_height1.70 MILLIMETERS MINIMUM AND 1.86 MILLIMETERS MAXIMUM MM
specification/standard_data0U583-SAE J515 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
part_name_assigned_by_controlling_agencyO-RING A419
NSN5331-01-650-3431
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: J515HK178X0124H MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
TECHNICAL CHARACTERISTICS
PART NAME ASSIGNED BY CONTROLLING AGENCYO-RING A419
SUBSTITUTES & CROSS-REFERENCES 2
SAE J515 HK1780 X 0124HReference document
Same NSN cross-reference
Reference document — Secondary reference
SAE J515 HK178X0124HSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy J515HK178X0124H?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is J515HK178X0124H?
J515HK178X0124H is a O-RING.
What parts can replace J515HK178X0124H?
There are 2 known substitutes for J515HK178X0124H: SAE J515 HK1780 X 0124H, SAE J515 HK178X0124H. Substitute compatibility should be verified for your specific system.
What is the NSN for J515HK178X0124H?
J515HK178X0124H is cataloged in the U.S. Government catalog under NSN 5331-01-650-3431. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — J515HK178X0124H