J515CH290X0446H: O-RING.
The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, temp_rating: -35.0 CELSIUS AND 125.0 CELSIUS DEGC, hardness_rating: 90.0 SHORE DUROMETER A NOMINAL, outside_diameter: 47.0 MILLIMETERS MINIMUM AND 48.0 MILLIMETERS MAXIMUM MM, special_features: TENSILE STRENGTH 10 MPA MININUM; USED FOR PETROLEUM BASED AND NON-FLAMMABLE WATER BASE HYDRAULIC FLUIDS, center_hole_diameter: 44.2 MILLIMETERS MINIMUM AND 45.0 MILLIMETERS MAXIMUM MM. This part is cataloged in the U.S.
Government catalog under NSN 5331-01-604-9811, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| material | RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR |
| temp_rating | -35.0 CELSIUS AND 125.0 CELSIUS DEGC |
| hardness_rating | 90.0 SHORE DUROMETER A NOMINAL |
| outside_diameter | 47.0 MILLIMETERS MINIMUM AND 48.0 MILLIMETERS MAXIMUM MM |
| special_features | TENSILE STRENGTH 10 MPA MININUM; USED FOR PETROLEUM BASED AND NON-FLAMMABLE WATER BASE HYDRAULIC FLUIDS |
| center_hole_diameter | 44.2 MILLIMETERS MINIMUM AND 45.0 MILLIMETERS MAXIMUM MM |
| elongation_percentage | 100 MINIMUM |
| cross-sectional_height | 2.8 MILLIMETERS MINIMUM AND 3.0 MILLIMETERS MAXIMUM MM |
| end_item_identification | STRYKER |
| material_document_and_classification | ASTM D2000 ASSN STD SINGLE MATERIAL RESPONSE OR SAE J200, TYPE 1 NITRILE ELASTOMER ASSN STD SINGLE MATERIAL RESPONSE |
| part_name_assigned_by_controlling_agency | O-RING |
| NSN | 5331-01-604-9811 |
| TEMP RATING | -35.0 CELSIUS AND 125.0 CELSIUS DEGC |
| CROSS-SECTIONAL HEIGHT | 2.8 MILLIMETERS MINIMUM AND 3.0 MILLIMETERS MAXIMUM MM |
| OUTSIDE DIAMETER | 47.0 MILLIMETERS MINIMUM AND 48.0 MILLIMETERS MAXIMUM MM |
| HARDNESS RATING | 90.0 SHORE DUROMETER A NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM D2000 ASSN STD SINGLE MATERIAL RESPONSE OR SAE J200, TYPE 1 NITRILE ELASTOMER ASSN STD SINGLE MATERIAL RESPONSE |
| ELONGATION PERCENTAGE | 100 MINIMUM |
| SPECIAL FEATURES | TENSILE STRENGTH 10 MPA MININUM; USED FOR PETROLEUM BASED AND NON-FLAMMABLE WATER BASE HYDRAULIC FLUIDS |
| CENTER HOLE DIAMETER | 44.2 MILLIMETERS MINIMUM AND 45.0 MILLIMETERS MAXIMUM MM |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | O-RING |
| END ITEM IDENTIFICATION | STRYKER |
No substitute or cross-reference records for this part.