PartsTable
Technical Data Sheet
PartsTable / COMPONENT / J51 TYPE B
J51 TYPE B ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC TUBE, seat_angle: 45.0 DEGREES FIRST END, temp_rating: -15.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF, thread_class: 3B FIRST END, exterior_color: RED, vacuum_in_torr: 50.8. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-540-1979, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
J51 TYPE B
NSN: 4720-00-540-1979
FSC: 4720
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC TUBE
seat_angle45.0 DEGREES FIRST END
temp_rating-15.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF
thread_class3B FIRST END
exterior_colorRED
vacuum_in_torr50.8
connection_typeTHREADED INTERNAL TUBE FIRST END
inside_diameter0.500 INCHES NOMINAL IN
connection_styleSWIVEL NUT FLARE FIRST END
outside_diameter0.920 INCHES NOMINAL IN
thread_directionRIGHT-HAND FIRST END
features_providedREUSABLE END FITTINGS
NSN4720-00-540-1979
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: J51 TYPE B · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED STEEL WIRE AND OUTER LAYER RUBBER IMPREGNATED BRAIDED FABRIC
•
EXTERIOR COLOR: RED
•
MATERIAL: RUBBER SYNTHETIC TUBE
•
HYDROSTATIC TEST PRESSURE: 700.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
•
NONDEFINITIVE SPEC/STD DATA: 20 SIZE
•
INSIDE SURFACE CONDITION: SMOOTH
•
SPECIFICATION/STANDARD DATA: 81343-SAE J51,TYPE B PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
•
VACUUM IN TORR: 50.8
TECHNICAL CHARACTERISTICS (FLIS)
LAYER COMPOSITION AND LOCATION1ST LAYER BRAIDED STEEL WIRE AND OUTER LAYER RUBBER IMPREGNATED BRAIDED FABRIC
EXTERIOR COLORRED
MATERIALRUBBER SYNTHETIC TUBE
HYDROSTATIC TEST PRESSURE700.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
NONDEFINITIVE SPEC/STD DATA20 SIZE
INSIDE SURFACE CONDITIONSMOOTH
SPECIFICATION/STANDARD DATA81343-SAE J51,TYPE B PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
VACUUM IN TORR50.8
OUTER COVERING ENVIRONMENTAL PROTECTIONOIL RESISTANT
OPERATING PRESSURE350.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
25820Interchangeable
interchangeable cross-reference
interchangeable
560954R1Interchangeable
interchangeable cross-reference
interchangeable
208Interchangeable
interchangeable cross-reference
interchangeable
503-S 33Interchangeable
interchangeable cross-reference
interchangeable
350-RTInterchangeable
interchangeable cross-reference
interchangeable
24120Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy J51 TYPE B?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is J51 TYPE B?
J51 TYPE B is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace J51 TYPE B?
There are 17 known substitutes for J51 TYPE B: 25820, 560954R1, 208 and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for J51 TYPE B?
J51 TYPE B is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-540-1979. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — J51 TYPE B

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026