PartsTable
Technical Data Sheet
Download PDF

J47NSN — BEARING,ROLLER,NEEDLE

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

J47NSN: BEARING,ROLLER,NEEDLE.

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL RETAINER, bore_diameter: 0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN, overall_width: 0.4275 INCHES MINIMUM AND 0.4375 INCHES MAXIMUM IN, alignment_type: RIGID, surface_finish: GROUND, special_features: EXTRA CAPACITY OUTER RING. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-807-3169, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
J47NSN
NSN: 3110-00-807-3169
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 60380 — TIMKEN AEROSPACE, INC DBA TORRINGTON PRODUCT (USA)
SPECIFICATIONS
materialSTEEL RETAINER
bore_diameter0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
overall_width0.4275 INCHES MINIMUM AND 0.4375 INCHES MAXIMUM IN
alignment_typeRIGID
surface_finishGROUND
special_featuresEXTRA CAPACITY OUTER RING
style_designatorNON-SEPARABLE, OPEN END, DRAWN SHELL
surface_treatmentNICKEL OUTER RING
overall_outside_diameter0.4375 INCHES MINIMUM AND 0.4385 INCHES MAXIMUM IN
NSN3110-00-807-3169
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: J47NSN · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: NON-SEPARABLE, OPEN END, DRAWN SHELL
•
OVERALL OUTSIDE DIAMETER: 0.4375 INCHES MINIMUM AND 0.4385 INCHES MAXIMUM IN
•
ALIGNMENT TYPE: RIGID
•
SURFACE TREATMENT: NICKEL RETAINER
TECHNICAL CHARACTERISTICS
SURFACE FINISHGROUND
STYLE DESIGNATORNON-SEPARABLE, OPEN END, DRAWN SHELL
OVERALL WIDTH0.4275 INCHES MINIMUM AND 0.4375 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER0.4375 INCHES MINIMUM AND 0.4385 INCHES MAXIMUM IN
ALIGNMENT TYPERIGID
SPECIAL FEATURESEXTRA CAPACITY OUTER RING
SURFACE TREATMENTNICKEL RETAINER
SURFACE TREATMENTNICKEL OUTER RING
BORE DIAMETER0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
MATERIALSTEEL OUTER RING
SUBSTITUTES & CROSS-REFERENCES 1
J47NNSReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy J47NSN?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is J47NSN?
J47NSN is a BEARING,ROLLER,NEEDLE.
What parts can replace J47NSN?
There is 1 known substitute for J47NSN: J47NNS. Substitute compatibility should be verified for your specific system.
What is the NSN for J47NSN?
J47NSN is cataloged in the U.S. Government catalog under NSN 3110-00-807-3169. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — J47NSN