PartsTable
Technical Data Sheet
Download PDF

J3288 — CLIP,SPRING TENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

J3288: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.125 INCHES NOMINAL IN, length: 1.023 INCHES NOMINAL IN, material: STEEL OVERALL, loop_height: 0.382 INCHES NOMINAL IN, loop_radius: 0.194 INCHES NOMINAL IN, overall_height: 0.406 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-510-8828, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
J3288
NSN: 5340-00-510-8828
FSC: 5340 — Hardware, Commercial
CAGE: 80837 — KYSOR/WESTRAN CORP AUSTIN TRAILER DIV (USA)
SPECIFICATIONS
width0.125 INCHES NOMINAL IN
length1.023 INCHES NOMINAL IN
materialSTEEL OVERALL
loop_height0.382 INCHES NOMINAL IN
loop_radius0.194 INCHES NOMINAL IN
overall_height0.406 INCHES NOMINAL IN
surface_treatmentCADMIUM OVERALL
material_thickness0.024 INCHES NOMINAL IN
NSN5340-00-510-8828
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: J3288 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 1.023 INCHES NOMINAL IN
•
LOOP RADIUS: 0.194 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.024 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM OVERALL
•
WIDTH: 0.125 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
LOOP HEIGHT: 0.382 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.406 INCHES NOMINAL IN
LENGTH1.023 INCHES NOMINAL IN
LOOP RADIUS0.194 INCHES NOMINAL IN
MATERIAL THICKNESS0.024 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM OVERALL
WIDTH0.125 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
LOOP HEIGHT0.382 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 2
83B687Reference document
Same NSN cross-reference
Reference document — Secondary reference
8735555Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy J3288?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is J3288?
J3288 is a CLIP,SPRING TENSION.
What parts can replace J3288?
There are 2 known substitutes for J3288: 83B687, 8735555. Substitute compatibility should be verified for your specific system.
What is the NSN for J3288?
J3288 is cataloged in the U.S. Government catalog under NSN 5340-00-510-8828. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — J3288