PartsTable
Technical Data Sheet
Download PDF

J3265 — NUT,SLEEVE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

J3265: NUT,SLEEVE.

The NUT,SLEEVE is a the manufacturer industrial component. Key specifications include material: IRON OVERALL, nut_style: SLEEVE, nut_length: 2.156 INCHES NOMINAL IN, nut_diameter: 3.466 INCHES MINIMUM AND 3.474 INCHES MAXIMUM IN, thread_class: 2B, thread_series: UN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-586-1767, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
J3265
NSN: 5310-00-586-1767
FSC: 5310 — Nuts and Washers
CAGE: 24234 — AUSTIN-WESTRAN LLC (USA)
SPECIFICATIONS
materialIRON OVERALL
nut_styleSLEEVE
nut_length2.156 INCHES NOMINAL IN
nut_diameter3.466 INCHES MINIMUM AND 3.474 INCHES MAXIMUM IN
thread_class2B
thread_seriesUN
flange_diameter3.992 INCHES MINIMUM AND 4.000 INCHES MAXIMUM IN
flange_thickness0.625 INCHES NOMINAL IN
thread_directionLEFT-HAND
nominal_thread_size1.750 INCHES IN
counterbore_diameter2.688 INCHES NOMINAL NUT IN
cross-sectional_shapeROUND FLANGE
NSN5310-00-586-1767
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: J3265 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGE DIAMETER: 3.992 INCHES MINIMUM AND 4.000 INCHES MAXIMUM IN
•
NUT LENGTH: 2.156 INCHES NOMINAL IN
•
FLANGE THICKNESS: 0.625 INCHES NOMINAL IN
•
THREAD SERIES: UN
•
HOLE CONFIGURATION STYLE: CONFIGURATION F
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-I-666,GRADE 1 OR GRADE 2 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
NUT COUNTERBORE DEPTH: 0.062 INCHES NOMINAL NUT IN
•
THREAD DIRECTION: LEFT-HAND
TECHNICAL CHARACTERISTICS
FLANGE DIAMETER3.992 INCHES MINIMUM AND 4.000 INCHES MAXIMUM IN
NUT LENGTH2.156 INCHES NOMINAL IN
FLANGE THICKNESS0.625 INCHES NOMINAL IN
THREAD SERIESUN
HOLE CONFIGURATION STYLECONFIGURATION F
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-I-666,GRADE 1 OR GRADE 2 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NUT COUNTERBORE DEPTH0.062 INCHES NOMINAL NUT IN
THREAD DIRECTIONLEFT-HAND
NOMINAL THREAD SIZE1.750 INCHES IN
NUT DIAMETER3.466 INCHES MINIMUM AND 3.474 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
8376595Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy J3265?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is J3265?
J3265 is a NUT,SLEEVE.
What parts can replace J3265?
There is 1 known substitute for J3265: 8376595. Substitute compatibility should be verified for your specific system.
What is the NSN for J3265?
J3265 is cataloged in the U.S. Government catalog under NSN 5310-00-586-1767. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — J3265

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.