PartsTable
Technical Data Sheet
PartsTable / COMPONENT / J30R6-TYPE1-1/4ID
J30R6-TYPE1-1/4ID ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The J30R6-TYPE1-1/4ID is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-283-6413, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
J30R6-TYPE1-1/4ID
NSN: 4720-00-283-6413
FSC: 4720
CAGE: 81343 — SOCIETY OF AUTOMOTIVE ENGINEERS INC (USA)
SPECIFICATIONS
Part NumberJ30R6-TYPE1-1/4ID
NSN4720-00-283-6413
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: J30R6-TYPE1-1/4ID · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 0.453 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
•
EXTERIOR COLOR: BLACK
•
MINIMUM INSIDE BENDING RADIUS: 3.500 INCHES IN
•
LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED RAYON CORD AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
•
MATERIAL: RUBBER SYNTHETIC TUBE
•
INSIDE SURFACE CONDITION: SMOOTH
•
OPERATING PRESSURE: 50.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
•
MEASURING METHOD AND LENGTH: 300.000 INCHES NOMINAL OVERALL IN
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER0.453 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
EXTERIOR COLORBLACK
MINIMUM INSIDE BENDING RADIUS3.500 INCHES IN
LAYER COMPOSITION AND LOCATION1ST LAYER BRAIDED RAYON CORD AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
MATERIALRUBBER SYNTHETIC TUBE
INSIDE SURFACE CONDITIONSMOOTH
OPERATING PRESSURE50.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
MEASURING METHOD AND LENGTH300.000 INCHES NOMINAL OVERALL IN
MEDIA FOR WHICH DESIGNEDFUEL/OIL, HYDROCARBON SINGLE RESPONSE
END ITEM IDENTIFICATIONGRUMMAN A10 AIRCRAFT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
191670Interchangeable
interchangeable cross-reference
interchangeable
27002Interchangeable
interchangeable cross-reference
interchangeable
ES0000048REVBInterchangeable
interchangeable cross-reference
interchangeable
901288-020Interchangeable
interchangeable cross-reference
interchangeable
852996-002Interchangeable
interchangeable cross-reference
interchangeable
7731223P42Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy J30R6-TYPE1-1/4ID?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is J30R6-TYPE1-1/4ID?
J30R6-TYPE1-1/4ID is a J30R6-TYPE1-1/4ID.
What parts can replace J30R6-TYPE1-1/4ID?
There are 24 known substitutes for J30R6-TYPE1-1/4ID: 191670, 27002, ES0000048REVB and 21 more. Substitute compatibility should be verified for your specific system.
What is the NSN for J30R6-TYPE1-1/4ID?
J30R6-TYPE1-1/4ID is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-283-6413. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — J30R6-TYPE1-1/4ID

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026