PartsTable
Technical Data Sheet
Download PDF

J3026-1 1-2 — RING,WIPER

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

J3026-1 1-2: RING,WIPER.

The RING,WIPER is a the manufacturer industrial component. Key specifications include material: UNABLE TO DECODE, ring_style: CONCENTRIC, joint_style: DIAGONAL JOINT, inside_diameter: 1.500 INCHES NOMINAL IN, outside_diameter: 5.125 INCHES NOMINAL IN, material_thickness: 0.125 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-021-2067, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
J3026-1 1-2
NSN: 5330-00-021-2067
NIINs: 000212067, 011035486
FSC: 5330 — Packing and Gasket Materials
CAGE: 13829 — PARKER HANNIFIN CORPORATION DIV CYLINDER DIVISION (USA)
SPECIFICATIONS
materialUNABLE TO DECODE
ring_styleCONCENTRIC
joint_styleDIAGONAL JOINT
inside_diameter1.500 INCHES NOMINAL IN
outside_diameter5.125 INCHES NOMINAL IN
material_thickness0.125 INCHES NOMINAL IN
outer_edge_thickness0.125 INCHES NOMINAL IN
cross-sectional_shape_stylePLAIN RECTANGULAR, STRAIGHT FACE
NSN5330-00-021-2067
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: J3026-1 1-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTER EDGE THICKNESS: 0.125 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: PLAIN RECTANGULAR, STRAIGHT FACE
•
OUTSIDE DIAMETER: 5.125 INCHES NOMINAL IN
•
JOINT STYLE: DIAGONAL JOINT
•
MATERIAL THICKNESS: 0.125 INCHES NOMINAL IN
•
INSIDE DIAMETER: 1.500 INCHES NOMINAL IN
•
RING STYLE: CONCENTRIC
•
MATERIAL: UNABLE TO DECODE
TECHNICAL CHARACTERISTICS
OUTER EDGE THICKNESS0.125 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEPLAIN RECTANGULAR, STRAIGHT FACE
OUTSIDE DIAMETER5.125 INCHES NOMINAL IN
JOINT STYLEDIAGONAL JOINT
MATERIAL THICKNESS0.125 INCHES NOMINAL IN
INSIDE DIAMETER1.500 INCHES NOMINAL IN
RING STYLECONCENTRIC
MATERIALUNABLE TO DECODE
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy J3026-1 1-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is J3026-1 1-2?
J3026-1 1-2 is a RING,WIPER.
What is the NSN for J3026-1 1-2?
J3026-1 1-2 is cataloged in the U.S. Government catalog under NSN 5330-00-021-2067. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — J3026-1 1-2

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.