PartsTable
Technical Data Sheet
PartsTable / COMPONENT / J30-7
J30-7 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, unit_type: GUILLOTINE, bore_diameter: 1.4995 INCHES NOMINAL IN, overall_width: 0.625 INCHES NOMINAL IN, alignment_type: RIGID, inside_diameter: 2.000 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-159-1675, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
J30-7
NSN: 3110-00-159-1675
FSC: 3110
CAGE: 09348 — LUCAS WESTERN INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
unit_typeGUILLOTINE
bore_diameter1.4995 INCHES NOMINAL IN
overall_width0.625 INCHES NOMINAL IN
alignment_typeRIGID
inside_diameter2.000 INCHES NOMINAL IN
special_featuresRESCO DESIGN; FOR TRIMMING DOG TOENAILS
style_designatorADJUSTABLE BAND
surface_treatmentZINC OVERALL
fastening_device_typeBUCKLE
overall_outside_diameter2.1880 INCHES NOMINAL IN
standard_tolerance_designationAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
NSN3110-00-159-1675
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: J30-7 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
•
ALIGNMENT TYPE: RIGID
•
BORE DIAMETER: 1.4995 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NON-SEPARABLE, WITH ROLLER RETAINER, HARDENED AND GROUND
•
MATERIAL: STEEL OVERALL
•
OVERALL OUTSIDE DIAMETER: 2.1880 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
OVERALL WIDTH1.2500 INCHES NOMINAL IN
ALIGNMENT TYPERIGID
BORE DIAMETER1.4995 INCHES NOMINAL IN
STYLE DESIGNATORNON-SEPARABLE, WITH ROLLER RETAINER, HARDENED AND GROUND
SPECIAL FEATURESOIL HOLE IN OUTER RING
MATERIALSTEEL OVERALL
OVERALL OUTSIDE DIAMETER2.1880 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
132-9-1Interchangeable
interchangeable cross-reference
interchangeable
74138Interchangeable
interchangeable cross-reference
interchangeable
48166HInterchangeable
interchangeable cross-reference
interchangeable
1118092Interchangeable
interchangeable cross-reference
interchangeable
C54935Interchangeable
interchangeable cross-reference
interchangeable
B94.9Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy J30-7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is J30-7?
J30-7 is a BEARING,ROLLER,NEEDLE.
What parts can replace J30-7?
There are 13 known substitutes for J30-7: 132-9-1, 74138, 48166H and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for J30-7?
J30-7 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-159-1675. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — J30-7

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026