PartsTable
Technical Data Sheet
PartsTable / COMPONENT / J266B0052A260B
J266B0052A260B ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include flow_angle: 90.0 DEGREES SECOND END, seat_angle: 37.0 DEGREES FIRST END, temp_rating: -100.0 FAHRENHEIT AND 450.0 FAHRENHEIT SINGLE RESPONSE DEGF, thread_class: 3B FIRST END, connection_type: THREADED INTERNAL TUBE FIRST END, inside_diameter: 0.188 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-928-4846, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
J266B0052A260B
NSN: 4720-00-928-4846
FSC: 4720
CAGE: 07482 — GENERAL ELECTRIC COMPANY (USA)
SPECIFICATIONS
flow_angle90.0 DEGREES SECOND END
seat_angle37.0 DEGREES FIRST END
temp_rating-100.0 FAHRENHEIT AND 450.0 FAHRENHEIT SINGLE RESPONSE DEGF
thread_class3B FIRST END
connection_typeTHREADED INTERNAL TUBE FIRST END
inside_diameter0.188 INCHES NOMINAL IN
connection_styleSWIVEL NUT FLARE SECOND END
outside_diameter0.312 INCHES NOMINAL IN
thread_directionRIGHT-HAND SECOND END
features_providedNUTS DRILLED FOR LOCKWIRE
operating_pressure1500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure12000.0 POUNDS PER SQUARE INCH LBS
NSN4720-00-928-4846
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: J266B0052A260B · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG: 260.0
•
NOMINAL THREAD SIZE: 0.438 INCHES FIRST END IN
•
OUTSIDE DIAMETER: 0.312 INCHES NOMINAL IN
•
HYDROSTATIC TEST PRESSURE: 12000.0 POUNDS PER SQUARE INCH LBS
•
END CONNECTION DESIGN: ELBOW FIRST END
•
BURST TEST PRESSURE: 12000.0 POUNDS PER SQUARE INCH LBS
•
THREAD DIRECTION: RIGHT-HAND FIRST END
TECHNICAL CHARACTERISTICS (FLIS)
ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG260.0
NOMINAL THREAD SIZE0.438 INCHES FIRST END IN
OUTSIDE DIAMETER0.312 INCHES NOMINAL IN
NOMINAL THREAD SIZE0.438 INCHES SECOND END IN
HYDROSTATIC TEST PRESSURE12000.0 POUNDS PER SQUARE INCH LBS
END CONNECTION DESIGNELBOW FIRST END
BURST TEST PRESSURE12000.0 POUNDS PER SQUARE INCH LBS
THREAD DIRECTIONRIGHT-HAND FIRST END
THREAD SERIES DESIGNATORUNIFIED NATIONAL JOINT FINE (UNJF) FIRST END
LAYER COMPOSITION AND LOCATIONOUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
J-2-6-6Interchangeable
interchangeable cross-reference
interchangeable
6022-2RSTGInterchangeable
interchangeable cross-reference
interchangeable
112557000 REV C FIND 67Interchangeable
interchangeable cross-reference
interchangeable
130102B0052H260Interchangeable
interchangeable cross-reference
interchangeable
180102B0052H260Interchangeable
interchangeable cross-reference
interchangeable
J266B0052C260BInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy J266B0052A260B?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is J266B0052A260B?
J266B0052A260B is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace J266B0052A260B?
There are 9 known substitutes for J266B0052A260B: J-2-6-6, 6022-2RSTG, 112557000 REV C FIND 67 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for J266B0052A260B?
J266B0052A260B is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-928-4846. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — J266B0052A260B

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026