PartsTable
Technical Data Sheet
Download PDF

J2655FAW0750C2 — WASHER,FLAT

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

J2655FAW0750C2: WASHER,FLAT.

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY OVERALL, thickness: 0.148 INCHES NOMINAL IN, hole_diameter: 0.812 INCHES NOMINAL IN, overall_diameter: 2.000 INCHES NOMINAL IN, peripheral_shape_style: ROUND, center_hole_shape_style: ROUND. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-641-6072, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
J2655FAW0750C2
NSN: 5310-01-641-6072
FSC: 5310 — Nuts and Washers
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
thickness0.148 INCHES NOMINAL IN
hole_diameter0.812 INCHES NOMINAL IN
overall_diameter2.000 INCHES NOMINAL IN
peripheral_shape_styleROUND
center_hole_shape_styleROUND
end_item_identificationHATCH 38X38
cross-sectional_shape_styleRECTANGULAR
material_document_and_classificationJ2655, TY-FAW NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE OVERALL
part_name_assigned_by_controlling_agencyWASHER, FLAT, ROUND WIDE
NSN5310-01-641-6072
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: J2655FAW0750C2 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 2.000 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: J2655, TY-FAW NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
PERIPHERAL SHAPE STYLE: ROUND
•
MATERIAL: COPPER ALLOY OVERALL
•
CENTER HOLE SHAPE STYLE: ROUND
TECHNICAL CHARACTERISTICS
OVERALL DIAMETER2.000 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONJ2655, TY-FAW NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
PERIPHERAL SHAPE STYLEROUND
PART NAME ASSIGNED BY CONTROLLING AGENCYWASHER, FLAT, ROUND WIDE
END ITEM IDENTIFICATIONHATCH 38X38
MATERIALCOPPER ALLOY OVERALL
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER0.812 INCHES NOMINAL IN
THICKNESS0.148 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 2
167-8396979Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
167-8396979 ITEM 24Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy J2655FAW0750C2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is J2655FAW0750C2?
J2655FAW0750C2 is a WASHER,FLAT.
What parts can replace J2655FAW0750C2?
There are 2 known substitutes for J2655FAW0750C2: 167-8396979, 167-8396979 ITEM 24. Substitute compatibility should be verified for your specific system.
What is the NSN for J2655FAW0750C2?
J2655FAW0750C2 is cataloged in the U.S. Government catalog under NSN 5310-01-641-6072. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — J2655FAW0750C2

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.