PartsTable
Technical Data Sheet
Download PDF

J2484FHN10-ZA18G — SCREW,CAP,HEXAGON HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

J2484FHN10-ZA18G: SCREW,CAP,HEXAGON HEAD.

The SCREW,CAP,HEXAGON HEAD is a the manufacturer industrial component. Key specifications include head_style: HEXAGON, head_height: 0.105 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN, thread_class: 2A A, thread_length: 0.562 INCHES NOMINAL IN, fastener_length: 1.125 INCHES NOMINAL IN, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-500-8280, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
J2484FHN10-ZA18G
NSN: 5305-01-500-8280
FSC: 5305 — Screws
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
head_styleHEXAGON
head_height0.105 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
thread_class2A A
thread_length0.562 INCHES NOMINAL IN
fastener_length1.125 INCHES NOMINAL IN
thread_directionRIGHT-HAND
surface_treatmentCADMIUM OR ZINC OVERALL
width_between_flats0.305 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
end_item_identification2320-01-380-8604
nominal_thread_diameter0.190 INCHES IN
thread_quantity_per_inch32
thread_series_designatorUNF
NSN5305-01-500-8280
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: J2484FHN10-ZA18G · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.105 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
•
FASTENER LENGTH: 1.125 INCHES NOMINAL IN
•
THREAD LENGTH: 0.562 INCHES NOMINAL IN
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
HEAD STYLE: HEXAGON
•
THREAD DIRECTION: RIGHT-HAND
•
WIDTH BETWEEN FLATS: 0.305 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
•
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.105 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
FASTENER LENGTH1.125 INCHES NOMINAL IN
THREAD LENGTH0.562 INCHES NOMINAL IN
NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
WIDTH BETWEEN FLATS0.305 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM OR ZINC OVERALL
THREAD CLASS2A A
END ITEM IDENTIFICATION2320-01-380-8604
SUBSTITUTES & CROSS-REFERENCES 2
456931Reference document
Same NSN cross-reference
Reference document — Secondary reference
5305PL0725554Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy J2484FHN10-ZA18G?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is J2484FHN10-ZA18G?
J2484FHN10-ZA18G is a SCREW,CAP,HEXAGON HEAD.
What parts can replace J2484FHN10-ZA18G?
There are 2 known substitutes for J2484FHN10-ZA18G: 456931, 5305PL0725554. Substitute compatibility should be verified for your specific system.
What is the NSN for J2484FHN10-ZA18G?
J2484FHN10-ZA18G is cataloged in the U.S. Government catalog under NSN 5305-01-500-8280. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — J2484FHN10-ZA18G