The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include flow_angle: 90.0 DEGREES SECOND END, seat_angle: 37.0 DEGREES FIRST END, thread_class: 3B FIRST END, exterior_color: NATURAL, connection_type: THREADED INTERNAL TUBE FIRST END, inside_diameter: 0.313 INCHES NOMINAL IN. This part is cataloged in the U.S.
Government catalog under NSN 4720-01-152-0633, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
J242D0102AA
NSN:4720-01-152-0633 FSC:4720 — Hose and Flexible Tubing CAGE:07482 — GENERAL ELECTRIC COMPANY (USA)
SPECIFICATIONS
flow_angle
90.0 DEGREES SECOND END
seat_angle
37.0 DEGREES FIRST END
thread_class
3B FIRST END
exterior_color
NATURAL
connection_type
THREADED INTERNAL TUBE FIRST END
inside_diameter
0.313 INCHES NOMINAL IN
connection_style
NUT ASSEMBLY WITH INVERTED FLARE AND GASKET FIRST END
outside_diameter
0.375 INCHES NOMINAL IN
thread_direction
RIGHT-HAND SECOND END
operating_pressure
1500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure
9000.0 POUNDS PER SQUARE INCH LBS
nominal_thread_size
0.563 INCHES FIRST END IN
NSN
4720-01-152-0633
COMPONENT DIAGRAM
KEY FEATURES
•
FLOW ANGLE: 90.0 DEGREES SECOND END
•
MEASURING METHOD AND LENGTH: 10.250 INCHES NOMINAL WORKING IN
•
MINIMUM INSIDE BENDING RADIUS: 4.000 INCHES IN
•
CONNECTION STYLE: NUT ASSEMBLY WITH INVERTED FLARE AND GASKET FIRST END
•
END CONNECTION DESIGN: ELBOW SECOND END
•
LAYER COMPOSITION AND LOCATION: 2ND LAYER MOLDED RUBBER, SYNTHETIC AND OUTER LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE
TECHNICAL CHARACTERISTICS
FLOW ANGLE
90.0 DEGREES SECOND END
MEASURING METHOD AND LENGTH
10.250 INCHES NOMINAL WORKING IN
MINIMUM INSIDE BENDING RADIUS
4.000 INCHES IN
CONNECTION STYLE
NUT ASSEMBLY WITH INVERTED FLARE AND GASKET FIRST END
CONNECTION STYLE
NUT ASSEMBLY WITH INVERTED FLARE AND GASKET SECOND END
END CONNECTION DESIGN
ELBOW SECOND END
END CONNECTION DESIGN
STRAIGHT FIRST END
LAYER COMPOSITION AND LOCATION
2ND LAYER MOLDED RUBBER, SYNTHETIC AND OUTER LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE
CONNECTION TYPE
THREADED INTERNAL TUBE SECOND END
CONNECTION TYPE
THREADED INTERNAL TUBE FIRST END
OTHER ITEMS IN FSC 4720 — Hose and Flexible Tubing
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is J242D0102AA?
J242D0102AA is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace J242D0102AA?
There are 2 known substitutes for J242D0102AA: J1175D0102AA, 10159588. Substitute compatibility should be verified for your specific system.
What is the NSN for J242D0102AA?
J242D0102AA is cataloged in the U.S. Government catalog under NSN 4720-01-152-0633. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.