PartsTable
Technical Data Sheet
Download PDF

J2295J995C2J56-ZG5 — NUT,PLAIN,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

J2295J995C2J56-ZG5: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: HEXAGON, nut_height: 3.370 INCHES MINIMUM AND 3.506 INCHES MAXIMUM IN, thread_class: 2B, thread_series: UNIFIED NATIONAL COARSE (UNC), thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-641-4228, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
J2295J995C2J56-ZG5
NSN: 5310-01-641-4228
FSC: 5310 — Nuts and Washers
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleHEXAGON
nut_height3.370 INCHES MINIMUM AND 3.506 INCHES MAXIMUM IN
thread_class2B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
thread_directionRIGHT-HAND
surface_treatmentZINC OVERALL
width_across_flats5.200 INCHES MINIMUM AND 5.375 INCHES MAXIMUM IN
nominal_thread_size3.500 INCHES IN
bearing_surface_typeCHAMFERED
end_item_identificationDOOR 16'6"X80
thread_quantity_per_inch4
NSN5310-01-641-4228
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: J2295J995C2J56-ZG5 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 5.200 INCHES MINIMUM AND 5.375 INCHES MAXIMUM IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 3.500 INCHES IN
•
NUT HEIGHT: 3.370 INCHES MINIMUM AND 3.506 INCHES MAXIMUM IN
•
SURFACE TREATMENT: ZINC OVERALL
•
NUT STYLE: HEXAGON
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS5.200 INCHES MINIMUM AND 5.375 INCHES MAXIMUM IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE3.500 INCHES IN
NUT HEIGHT3.370 INCHES MINIMUM AND 3.506 INCHES MAXIMUM IN
SURFACE TREATMENTZINC OVERALL
PART NAME ASSIGNED BY CONTROLLING AGENCYNUT,JAM,ZINC,PLATE
NUT STYLEHEXAGON
THREAD CLASS2B
END ITEM IDENTIFICATIONDOOR 16'6"X80
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
782-7666615 ITEM 82Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy J2295J995C2J56-ZG5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is J2295J995C2J56-ZG5?
J2295J995C2J56-ZG5 is a NUT,PLAIN,HEXAGON.
What parts can replace J2295J995C2J56-ZG5?
There is 1 known substitute for J2295J995C2J56-ZG5: 782-7666615 ITEM 82. Substitute compatibility should be verified for your specific system.
What is the NSN for J2295J995C2J56-ZG5?
J2295J995C2J56-ZG5 is cataloged in the U.S. Government catalog under NSN 5310-01-641-4228. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — J2295J995C2J56-ZG5

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.