J2295F468C2F5LN16U — SCREW,CAP,SOCKET HEAD

✓ Government record, cited

— · BOLT SCREW

PRODUCT OVERVIEW

J2295F468C2F5LN16U: SCREW,CAP,SOCKET HEAD.

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include material: NICKEL ALLOY 400 OVERALL, head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.600 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN, thread_length: 0.661 INCHES MINIMUM IN, fastener_length: 0.970 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-447-7313, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

J2295F468C2F5LN16U

NSN: 5305-01-447-7313
FSC: 5305 — Screws
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)

SPECIFICATIONS

material	NICKEL ALLOY 400 OVERALL
head_style	FLAT COUNTERSUNK
thread_class	2A A
head_diameter	0.600 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN
thread_length	0.661 INCHES MINIMUM IN
fastener_length	0.970 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
locking_feature	PELLET THREADS
special_features	NO COATING OR FINISH IS REQUIRED
thread_direction	RIGHT-HAND
countersink_angle	80.0 DEGREES MINIMUM AND 84.0 DEGREES MAXIMUM
width_across_flats	0.188 INCHES NOMINAL IN
internal_drive_style	HEXAGON
NSN	5305-01-447-7313

COMPONENT DIAGRAM

KEY FEATURES

•

WIDTH ACROSS FLATS: 0.188 INCHES NOMINAL IN

•

FASTENER LENGTH: 0.970 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN

•

THREAD LENGTH: 0.661 INCHES MINIMUM IN

•

MATERIAL DOCUMENT AND CLASSIFICATION: ASTM F468 ASSN STD SINGLE MATERIAL RESPONSE FASTENER

•

NOMINAL THREAD DIAMETER: 0.312 INCHES IN

•

HEAD STYLE: FLAT COUNTERSUNK

•

THREAD DIRECTION: RIGHT-HAND

•

DEPARTURE FROM CITED DOCUMENT: AS MODIFIED BY LOCKING FEATURE

TECHNICAL CHARACTERISTICS

WIDTH ACROSS FLATS	0.188 INCHES NOMINAL IN
FASTENER LENGTH	0.970 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
THREAD LENGTH	0.661 INCHES MINIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION	ASTM F468 ASSN STD SINGLE MATERIAL RESPONSE FASTENER
NOMINAL THREAD DIAMETER	0.312 INCHES IN
HEAD STYLE	FLAT COUNTERSUNK
THREAD DIRECTION	RIGHT-HAND
DEPARTURE FROM CITED DOCUMENT	AS MODIFIED BY LOCKING FEATURE
LOCKING FEATURE	PELLET THREADS
SPECIAL FEATURES	NO COATING OR FINISH IS REQUIRED

SUBSTITUTES & CROSS-REFERENCES 3

123-4403525 PART 4Reference document

Same NSN cross-reference

Reference document — Secondary reference

F468C2F5L16UReference document

Same NSN cross-reference

Reference document — Secondary reference

J2295Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy J2295F468C2F5LN16U?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is J2295F468C2F5LN16U?

J2295F468C2F5LN16U is a SCREW,CAP,SOCKET HEAD.

What parts can replace J2295F468C2F5LN16U?

There are 3 known substitutes for J2295F468C2F5LN16U: 123-4403525 PART 4, F468C2F5L16U, J2295. Substitute compatibility should be verified for your specific system.

What is the NSN for J2295F468C2F5LN16U?

J2295F468C2F5LN16U is cataloged in the U.S. Government catalog under NSN 5305-01-447-7313. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

J2295F468C2F5LN16U — SCREW,CAP,SOCKET HEAD

Request a Quote — J2295F468C2F5LN16U