PartsTable
Technical Data Sheet
Download PDF

J2295A194U2R48-Z7 — NUT,PLAIN,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

J2295A194U2R48-Z7: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: HEXAGON, nut_height: 2.893 INCHES MINIMUM AND 3.013 INCHES MAXIMUM IN, thread_class: 2B, thread_series: UN, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-646-0059, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
J2295A194U2R48-Z7
NSN: 5310-01-646-0059
FSC: 5310 — Nuts and Washers
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleHEXAGON
nut_height2.893 INCHES MINIMUM AND 3.013 INCHES MAXIMUM IN
thread_class2B
thread_seriesUN
thread_directionRIGHT-HAND
surface_treatmentZINC OVERALL
width_across_flats4.475 INCHES MINIMUM AND 4.625 INCHES MAXIMUM IN
nominal_thread_size3.000 INCHES IN
bearing_surface_typeFLAT
end_item_identificationDOOR, ACTF EL
thread_quantity_per_inch8
NSN5310-01-646-0059
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: J2295A194U2R48-Z7 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 4.475 INCHES MINIMUM AND 4.625 INCHES MAXIMUM IN
•
THREAD SERIES: UN
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 3.000 INCHES IN
•
NUT HEIGHT: 2.893 INCHES MINIMUM AND 3.013 INCHES MAXIMUM IN
•
SURFACE TREATMENT: ZINC OVERALL
•
NUT STYLE: HEXAGON
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS4.475 INCHES MINIMUM AND 4.625 INCHES MAXIMUM IN
THREAD SERIESUN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE3.000 INCHES IN
NUT HEIGHT2.893 INCHES MINIMUM AND 3.013 INCHES MAXIMUM IN
SURFACE TREATMENTZINC OVERALL
PART NAME ASSIGNED BY CONTROLLING AGENCYHEX NUT
NUT STYLEHEXAGON
THREAD CLASS2B
END ITEM IDENTIFICATIONDOOR, ACTF EL
SUBSTITUTES & CROSS-REFERENCES 2
588-7666730 ITEM 5Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
SAE J2295Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy J2295A194U2R48-Z7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is J2295A194U2R48-Z7?
J2295A194U2R48-Z7 is a NUT,PLAIN,HEXAGON.
What parts can replace J2295A194U2R48-Z7?
There are 2 known substitutes for J2295A194U2R48-Z7: 588-7666730 ITEM 5, SAE J2295. Substitute compatibility should be verified for your specific system.
What is the NSN for J2295A194U2R48-Z7?
J2295A194U2R48-Z7 is cataloged in the U.S. Government catalog under NSN 5310-01-646-0059. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — J2295A194U2R48-Z7