PartsTable
Technical Data Sheet
Download PDF

J228 — BEARING,ROLLER,NEEDLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

J228: BEARING,ROLLER,NEEDLE.

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_diameter: 1.3750 INCHES NOMINAL IN, overall_width: 0.5000 INCHES NOMINAL IN, alignment_type: RIGID, surface_finish: GROUND, style_designator: NON-SEPARABLE, WITH ROLLER RETAINER, OPEN END, DRAWN SHELL. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-164-6290, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
J228
NSN: 5331-00-164-6290
NIINs: 001646290, 008262872, 010096767
FSC: 5331 — O-ring
CAGE: 07482 — GENERAL ELECTRIC COMPANY (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_diameter1.3750 INCHES NOMINAL IN
overall_width0.5000 INCHES NOMINAL IN
alignment_typeRIGID
surface_finishGROUND
style_designatorNON-SEPARABLE, WITH ROLLER RETAINER, OPEN END, DRAWN SHELL
center_hole_diameter1.108 INCHES MINIMUM AND 1.120 INCHES MAXIMUM IN
lubrication_materialLUBRICANT
cross-sectional_height0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
overall_outside_diameter1.6250 INCHES NOMINAL IN
retainer_fabrication_methodPRESSED
standard_tolerance_designationAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
NSN5331-00-164-6290
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: J228 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 1.789 INCHES MINIMUM AND 1.809 INCHES MAXIMUM IN
•
MATERIAL: PLASTIC POLYTETRAFLUOROETHYLENE
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
CENTER HOLE DIAMETER1.789 INCHES MINIMUM AND 1.809 INCHES MAXIMUM IN
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE
SUBSTITUTES & CROSS-REFERENCES 2
10159977Reference document
Same NSN cross-reference
Reference document — Informative reference only
J228P133Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy J228?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is J228?
J228 is a BEARING,ROLLER,NEEDLE.
What parts can replace J228?
There are 2 known substitutes for J228: 10159977, J228P133. Substitute compatibility should be verified for your specific system.
What is the NSN for J228?
J228 is cataloged in the U.S. Government catalog under NSN 5331-00-164-6290. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — J228

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.