The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL BALL, bore_shape: STRAIGHT, contact_angle: 25.0 DEGREES MAXIMUM, load_direction: ANGULAR, surface_finish: GROUND, internal_clearance: 0.0008 INCHES MINIMUM RADIAL AND 0.0011 INCHES MAXIMUM RADIAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-913-4810, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
| material | STEEL BALL |
| bore_shape | STRAIGHT |
| contact_angle | 25.0 DEGREES MAXIMUM |
| load_direction | ANGULAR |
| surface_finish | GROUND |
| special_features | FACES FLUSH WITHIN 0.0001 IN. UNDER 3 LB THRUST ALSO MARKED HIGH POINTS OF ECCENTRICITY IN EXCESS OF 0.0005 IN. ALSO BREAKOUT IN OD OF INNER RING,ONE SIDE LBS |
| internal_clearance | 0.0008 INCHES MINIMUM RADIAL AND 0.0011 INCHES MAXIMUM RADIAL IN |
| calibration_designator | C4X |
| retainer_fabrication_method | PRESSED |
| standard_tolerance_designation | ABEC NO.5 |
| NSN | 3110-00-913-4810 |
| CALIBRATION DESIGNATOR | C4X |
| MATERIAL | STEEL BALL |
| MATERIAL | STEEL INNER RING |
| MATERIAL | COPPER ALLOY RETAINER |
| INTERNAL CLEARANCE | 0.0008 INCHES MINIMUM RADIAL AND 0.0011 INCHES MAXIMUM RADIAL IN |
| MATERIAL | STEEL OUTER RING |
| SPECIAL FEATURES | FACES FLUSH WITHIN 0.0001 IN. UNDER 3 LB THRUST ALSO MARKED HIGH POINTS OF ECCENTRICITY IN EXCESS OF 0.0005 IN. ALSO BREAKOUT IN OD OF INNER RING,ONE SIDE LBS |
| SURFACE FINISH | GROUND |
| STANDARD TOLERANCE DESIGNATION | ABEC NO.5 |
| CONTACT ANGLE | 25.0 DEGREES MAXIMUM |