PartsTable / O-RING / J200A10
J200A10
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL, temp_rating: -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL OVERALL, outside_diameter: 0.368 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN, special_features: DO NOT USE ON THE T-55 TURBINE ENGINE, center_hole_diameter: 0.234 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-584-0266, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
J200A10
NSN: 5331-00-584-0266 FSC: 5331 — O-RINGCAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
material RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL temp_rating -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF hardness_rating 70.0 SHORE DUROMETER A NOMINAL OVERALL outside_diameter 0.368 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN special_features DO NOT USE ON THE T-55 TURBINE ENGINE center_hole_diameter 0.234 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN cross-sectional_height 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN cross-sectional_shape_style O-RING material_document_and_classification MIL-P-5516,CL B MIL SPEC SINGLE MATERIAL RESPONSE OVERALL NSN 5331-00-584-0266
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: J200A10
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• TEMP RATING: 275.0 FAHRENHEIT DEGF
• CENTER HOLE DIAMETER: 0.234 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN
• MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
• OUTSIDE DIAMETER: 0.368 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
• CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
TEMP RATING 275.0 FAHRENHEIT DEGF CENTER HOLE DIAMETER 0.234 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN MATERIAL RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SPECIAL FEATURES DO NOT USE ON THE T-55 TURBINE ENGINE OUTSIDE DIAMETER 0.368 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN CROSS-SECTIONAL HEIGHT 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 37
HP1937S83 Interchangeable interchangeable cross-reference
interchangeable
P167 Interchangeable interchangeable cross-reference
interchangeable
24LG Interchangeable interchangeable cross-reference
interchangeable
B180-010 Interchangeable interchangeable cross-reference
interchangeable
0X58-010-15CP Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy J200A10?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is J200A10?
J200A10 is a O-RING.
What parts can replace J200A10?
There are 37 known substitutes for J200A10: HP1937S83, P167, 24LG and 34 more. Substitute compatibility should be verified for your specific system.
Is J200A10 still available?
J200A10 is currently cancelled.
Request a Quote — J200A10