PartsTable
Technical Data Sheet
Download PDF

J198P05 — NUT,SELF-LOCKING,SPLINE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

J198P05: NUT,SELF-LOCKING,SPLINE.

The NUT,SELF-LOCKING,SPLINE is a the manufacturer industrial component. Key specifications include material: IRON ALLOY 660 OVERALL, nut_style: SPLINE, nut_height: 0.474 INCHES MAXIMUM IN, lubrication: DRY FILM LUBRICANT, nut_diameter: 0.692 INCHES MAXIMUM IN, pilot_length: 0.387 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-106-6554, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
J198P05
NSN: 5310-00-106-6554
FSC: 5310 — Nuts and Washers
CAGE: 15653 — HOWMET GLOBAL FASTENING SYSTEMS INC (USA)
SPECIFICATIONS
materialIRON ALLOY 660 OVERALL
nut_styleSPLINE
nut_height0.474 INCHES MAXIMUM IN
lubricationDRY FILM LUBRICANT
nut_diameter0.692 INCHES MAXIMUM IN
pilot_length0.387 INCHES MAXIMUM IN
thread_class3B
thread_seriesUNIFIED NATIONAL JOINT FINE (UNJF)
pilot_diameter0.472 INCHES MAXIMUM IN
locking_featurePREVAILING TORQUE ALL METAL DESIGN
thread_directionRIGHT-HAND
nominal_thread_size0.438 INCHES IN
NSN5310-00-106-6554
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: J198P05 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION: DRY FILM LUBRICANT
•
THREAD SERIES: UNIFIED NATIONAL JOINT FINE (UNJF)
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5735 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.438 INCHES IN
•
NUT DIAMETER: 0.692 INCHES MAXIMUM IN
•
PILOT DIAMETER: 0.472 INCHES MAXIMUM IN
•
PILOT LENGTH: 0.387 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
LUBRICATIONDRY FILM LUBRICANT
THREAD SERIESUNIFIED NATIONAL JOINT FINE (UNJF)
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5735 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.438 INCHES IN
NUT DIAMETER0.692 INCHES MAXIMUM IN
PILOT DIAMETER0.472 INCHES MAXIMUM IN
PILOT LENGTH0.387 INCHES MAXIMUM IN
LOCKING FEATUREPREVAILING TORQUE ALL METAL DESIGN
NUT HEIGHT0.474 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
LH8521-070Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy J198P05?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is J198P05?
J198P05 is a NUT,SELF-LOCKING,SPLINE.
What parts can replace J198P05?
There is 1 known substitute for J198P05: LH8521-070. Substitute compatibility should be verified for your specific system.
What is the NSN for J198P05?
J198P05 is cataloged in the U.S. Government catalog under NSN 5310-00-106-6554. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — J198P05