PartsTable
Technical Data Sheet
PartsTable / COMPONENT / J150
J150 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

CONNECTOR,RECEPTACLE,ELECTRICAL. Key specifications include material: COPPER SPRING, nut_style: SLOTTED, HEXAGON, body_style: COAXIAL HOLE OR SLOT MOUNTED, nut_height: 0.500 INCHES NOMINAL IN, design_type: BLOCK AND PIN, thread_class: 2B. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-350-5884, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
J150
NSN: 5310-00-350-5884
FSC: 5310
CAGE: 95019 — DANA CORP SPICER TRANSMISSION DIV (USA)
SPECIFICATIONS
materialCOPPER SPRING
nut_styleSLOTTED, HEXAGON
body_styleCOAXIAL HOLE OR SLOT MOUNTED
nut_height0.500 INCHES NOMINAL IN
design_typeBLOCK AND PIN
thread_class2B
body_diameter0.439 INCHES NOMINAL IN
terminal_typeCRIMP
thread_seriesUNEF
overall_height0.638 INCHES NOMINAL IN
overall_length4.250 INCHES NOMINAL IN
special_featuresOD 1.500 IN., MATERIAL ALLOY STEEL IN
NSN5310-00-350-5884
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: J150 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES: UNEF
•
THREAD QUANTITY PER INCH: 20
•
NOMINAL THREAD SIZE: 1.000 INCHES IN
•
BEARING SURFACE TYPE: WASHER FACED
•
THREAD CLASS: 2B
•
NUT HEIGHT: 0.500 INCHES NOMINAL IN
•
NUT STYLE: SLOTTED, HEXAGON
•
WIDTH ACROSS FLATS: 1.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
THREAD SERIESUNEF
THREAD QUANTITY PER INCH20
NOMINAL THREAD SIZE1.000 INCHES IN
BEARING SURFACE TYPEWASHER FACED
THREAD CLASS2B
NUT HEIGHT0.500 INCHES NOMINAL IN
NUT STYLESLOTTED, HEXAGON
WIDTH ACROSS FLATS1.500 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-633-CANC FED SPEC SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
J150-29Interchangeable
interchangeable cross-reference
interchangeable
B4036520Interchangeable
interchangeable cross-reference
interchangeable
SM-D-859779Interchangeable
interchangeable cross-reference
interchangeable
J150Interchangeable
interchangeable cross-reference
interchangeable
6409001Interchangeable
interchangeable cross-reference
interchangeable
UJ-12Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy J150?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is J150?
J150 is a CONNECTOR,RECEPTACLE,ELECTRICAL.
What parts can replace J150?
There are 8 known substitutes for J150: J150-29, B4036520, SM-D-859779 and 5 more. Substitute compatibility should be verified for your specific system.
Is J150 still available?
J150 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — J150

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026