PartsTable
Technical Data Sheet
PartsTable / COMPONENT / J1412
J1412 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL CASE, dial_size: 2 IN. DIA IN, scale_name: PRESSURE-VACUUM, scale_type: SINGLE, scale_range: +0.0 TO 30.0 INCHES AND +0.0 TO 30.0 POUNDS PRESSURE PER SQUARE INCH LBS, pointer_type: INDICATING.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-143-6745, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
J1412
NSN: 3110-01-143-6745
FSC: 3110
CAGE: 60380 — TIMKEN AEROSPACE, INC DBA TORRINGTON PRODUCT (USA)
SPECIFICATIONS
materialSTEEL CASE
dial_size2 IN. DIA IN
scale_namePRESSURE-VACUUM
scale_typeSINGLE
scale_range+0.0 TO 30.0 INCHES AND +0.0 TO 30.0 POUNDS PRESSURE PER SQUARE INCH LBS
pointer_typeINDICATING
adjustabilityADJUSTABLE
bore_diameter0.8750 INCHES NOMINAL0.8750 INCHES NOMINAL IN
overall_depth1.188 INCHES NOMINAL IN
overall_width0.7400 INCHES MINIMUM AND 0.7400 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM0.7500 INCHES MAXIMUM IN
pointer_colorBLACK
actuation_typeBOURDON TUBE
NSN3110-01-143-6745
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: J1412 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUNDGROUND
•
BORE DIAMETER: 0.8750 INCHES NOMINAL0.8750 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGSAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
•
ALIGNMENT TYPE: RIGIDRIGID
•
MATERIAL: STEEL OVERALL
•
OVERALL OUTSIDE DIAMETER: 1.1250 INCHES NOMINAL1.1250 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NON-SEPARABLE, WITH ROLLER RETAINER, OPEN END, DRAWN SHELLNON-SEPARABLE, WITH ROLLER RETAINER, OPEN END, DRAWN SHELL
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE FINISHGROUNDGROUND
BORE DIAMETER0.8750 INCHES NOMINAL0.8750 INCHES NOMINAL IN
OVERALL WIDTH0.7400 INCHES MINIMUM AND 0.7400 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM0.7500 INCHES MAXIMUM IN
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGSAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
ALIGNMENT TYPERIGIDRIGID
MATERIALSTEEL OVERALL
OVERALL OUTSIDE DIAMETER1.1250 INCHES NOMINAL1.1250 INCHES NOMINAL IN
STYLE DESIGNATORNON-SEPARABLE, WITH ROLLER RETAINER, OPEN END, DRAWN SHELLNON-SEPARABLE, WITH ROLLER RETAINER, OPEN END, DRAWN SHELL
RETAINER FABRICATION METHODPRESSED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
167218Interchangeable
interchangeable cross-reference
interchangeable
S1-8-007-H-39Interchangeable
interchangeable cross-reference
interchangeable
J1412Interchangeable
interchangeable cross-reference
interchangeable
1375AInterchangeable
interchangeable cross-reference
interchangeable
137/8-5AInterchangeable
Same NIIN cross-reference
interchangeable
139B-15Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy J1412?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is J1412?
J1412 is a BEARING,ROLLER,NEEDLE.
What parts can replace J1412?
There are 8 known substitutes for J1412: 167218, S1-8-007-H-39, J1412 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for J1412?
J1412 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-143-6745. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — J1412

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026