PartsTable
Technical Data Sheet
PartsTable / COMPONENT / J1409-001
J1409-001 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CAP,FILLER OPENING is a the manufacturer industrial component. Key specifications include material: PLASTIC OVERALL, overall_height: 1.734 INCHES NOMINAL IN, outside_diameter: 4.297 INCHES NOMINAL IN, style_designator: TUBE TYPE, accommodation_type: LUGS END GRIPPING, retaining_device_type: SAFETY WIRE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-499-9695, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
J1409-001
NSN: 5340-00-499-9695
FSC: 5340
CAGE: 17234 — EUROPA CORP (USA)
SPECIFICATIONS
materialPLASTIC OVERALL
overall_height1.734 INCHES NOMINAL IN
outside_diameter4.297 INCHES NOMINAL IN
style_designatorTUBE TYPE
accommodation_typeLUGS END GRIPPING
retaining_device_typeSAFETY WIRE
system_for_which_designedNONPRESSURIZED
filler_neck_diameter_for_which_designed4.188 INCHES NOMINAL IN
NSN5340-00-499-9695
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: J1409-001 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SYSTEM FOR WHICH DESIGNED: NONPRESSURIZED
•
RETAINING DEVICE TYPE: SAFETY WIRE
•
FILLER NECK DIAMETER FOR WHICH DESIGNED: 4.188 INCHES NOMINAL IN
•
MATERIAL: PLASTIC OVERALL
•
STYLE DESIGNATOR: TUBE TYPE
•
ACCOMMODATION TYPE: LUGS END GRIPPING
•
OUTSIDE DIAMETER: 4.297 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SYSTEM FOR WHICH DESIGNEDNONPRESSURIZED
OVERALL HEIGHT1.734 INCHES NOMINAL IN
RETAINING DEVICE TYPESAFETY WIRE
FILLER NECK DIAMETER FOR WHICH DESIGNED4.188 INCHES NOMINAL IN
MATERIALPLASTIC OVERALL
STYLE DESIGNATORTUBE TYPE
ACCOMMODATION TYPELUGS END GRIPPING
OUTSIDE DIAMETER4.297 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
PJ117Interchangeable
interchangeable cross-reference
interchangeable
491223Interchangeable
interchangeable cross-reference
interchangeable
217AInterchangeable
interchangeable cross-reference
interchangeable
GC560AR1Interchangeable
Same NIIN cross-reference
interchangeable
SA13452-1Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy J1409-001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is J1409-001?
J1409-001 is a CAP,FILLER OPENING.
What parts can replace J1409-001?
There are 5 known substitutes for J1409-001: PJ117, 491223, 217A and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for J1409-001?
J1409-001 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-499-9695. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — J1409-001

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026