J1221G03 — CLAMP,LOOP

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

J1221G03: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.274 INCHES MINIMUM AND 0.288 INCHES MAXIMUM IN, material: STEEL COMP 321 BAND, overall_width: 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.027 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-277-1085, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

J1221G03

NSN: 5340-01-277-1085
FSC: 5340 — Hardware, Commercial
CAGE: 07482 — GENERAL ELECTRIC COMPANY (USA)

SPECIFICATIONS

diameter	0.274 INCHES MINIMUM AND 0.288 INCHES MAXIMUM IN
material	STEEL COMP 321 BAND
overall_width	0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
style_designator	OFFSET MOUNT
tongue_hole_type	ROUND, UNTHREADED
material_thickness	0.027 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN
loop_inside_diameter	0.288 INCHES NOMINAL IN
material_document_and_classification	AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end	0.686 INCHES MINIMUM AND 0.761 INCHES MAXIMUM IN
center_to_center_distance_between_loop_and_mounting_hole	0.483 INCHES MINIMUM AND 0.533 INCHES MAXIMUM IN
NSN	5340-01-277-1085

COMPONENT DIAGRAM

KEY FEATURES

•

STYLE DESIGNATOR: OFFSET MOUNT

•

MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE BAND

•

DIAMETER: 0.274 INCHES MINIMUM AND 0.288 INCHES MAXIMUM IN

•

MATERIAL THICKNESS: 0.027 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN

•

DISTANCE FROM LOOP CENTER TO TONGUE END: 0.686 INCHES MINIMUM AND 0.761 INCHES MAXIMUM IN

•

TONGUE HOLE TYPE: ROUND, UNTHREADED

•

CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.483 INCHES MINIMUM AND 0.533 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

STYLE DESIGNATOR	OFFSET MOUNT
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE BAND
DIAMETER	0.274 INCHES MINIMUM AND 0.288 INCHES MAXIMUM IN
OVERALL WIDTH	0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
MATERIAL THICKNESS	0.027 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END	0.686 INCHES MINIMUM AND 0.761 INCHES MAXIMUM IN
TONGUE HOLE TYPE	ROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE	0.483 INCHES MINIMUM AND 0.533 INCHES MAXIMUM IN
MATERIAL	STEEL COMP 321 BAND
LOOP INSIDE DIAMETER	0.288 INCHES NOMINAL IN

OTHER ITEMS IN FSC 5340 — Hardware, Commercial

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275

SUBSTITUTES & CROSS-REFERENCES 1

J1162G03Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy J1221G03?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is J1221G03?

J1221G03 is a CLAMP,LOOP.

What parts can replace J1221G03?

There is 1 known substitute for J1221G03: J1162G03. Substitute compatibility should be verified for your specific system.

What is the NSN for J1221G03?

J1221G03 is cataloged in the U.S. Government catalog under NSN 5340-01-277-1085. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

J1221G03 — CLAMP,LOOP

Request a Quote — J1221G03