PartsTable
Technical Data Sheet
Download PDF

J108P10B — PIN,TAPERED,PLAIN

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

J108P10B: PIN,TAPERED,PLAIN.

The PIN,TAPERED,PLAIN is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: ALUMINUM ALLOY 2024 OVERALL, surface_finish: 63.0 MICROINCHES OVERALL, first_end_style: SQUARE W/THRU HOLE, surface_treatment: OXIDE FILM AND WAX OVERALL, first_end_location: BOTH ENDS, large_end_diameter: 0.6004 INCHES MINIMUM AND 0.6012 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-113-6202, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
J108P10B
NSN: 5315-00-113-6202
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 07482 — GENERAL ELECTRIC COMPANY (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 2024 OVERALL
surface_finish63.0 MICROINCHES OVERALL
first_end_styleSQUARE W/THRU HOLE
surface_treatmentOXIDE FILM AND WAX OVERALL
first_end_locationBOTH ENDS
large_end_diameter0.6004 INCHES MINIMUM AND 0.6012 INCHES MAXIMUM IN
pin_overall_length0.583 INCHES MINIMUM AND 0.597 INCHES MAXIMUM IN
material_document_and_classificationQQ-A-225/6,T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
second_end_relationship_with_first_endIDENTICAL
surface_treatment_document_and_classificationMIL-C-5541,CL 2,DYED YELLOW MIL SPEC ALL TREATMENT RESPONSES OVERALL
NSN5315-00-113-6202
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: J108P10B · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 63.0 MICROINCHES OVERALL
•
FIRST END LOCATION: BOTH ENDS
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-5541,CL 2,DYED YELLOW MIL SPEC ALL TREATMENT RESPONSES OVERALL
•
LARGE END DIAMETER: 0.6004 INCHES MINIMUM AND 0.6012 INCHES MAXIMUM IN
•
FIRST END STYLE: SQUARE W/THRU HOLE
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-225/6,T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
PIN OVERALL LENGTH: 0.583 INCHES MINIMUM AND 0.597 INCHES MAXIMUM IN
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
SURFACE FINISH63.0 MICROINCHES OVERALL
FIRST END LOCATIONBOTH ENDS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-5541,CL 2,DYED YELLOW MIL SPEC ALL TREATMENT RESPONSES OVERALL
LARGE END DIAMETER0.6004 INCHES MINIMUM AND 0.6012 INCHES MAXIMUM IN
FIRST END STYLESQUARE W/THRU HOLE
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-225/6,T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
PIN OVERALL LENGTH0.583 INCHES MINIMUM AND 0.597 INCHES MAXIMUM IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
SURFACE TREATMENTOXIDE FILM AND WAX OVERALL
MATERIALALUMINUM ALLOY 2024 OVERALL
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES 2
PLGA6566010ASame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
656601PINReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy J108P10B?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is J108P10B?
J108P10B is a PIN,TAPERED,PLAIN.
What parts can replace J108P10B?
There are 2 known substitutes for J108P10B: PLGA6566010A, 656601PIN. Substitute compatibility should be verified for your specific system.
What is the NSN for J108P10B?
J108P10B is cataloged in the U.S. Government catalog under NSN 5315-00-113-6202. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — J108P10B