J104099-35 — CIRCUIT CARD ASSEMBLY

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

J104099-35: CIRCUIT CARD ASSEMBLY.

The CIRCUIT CARD ASSEMBLY is a the manufacturer industrial component. Key specifications include material: STEEL COMP 416 HUB, body_style: PLAIN, SOLID, bore_style: TAPERED W/KEYWAY SECOND END, tooth_form: STANDARD, pitch_diameter: 3.4950 INCHES NOMINAL IN, pressure_angle: 14.5000 DEGREES. This part is cataloged in the U.S.

Government catalog under NSN 3020-00-517-2295, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

J104099-35

NSN: 3020-00-517-2295
FSC: 3020 — Gears, Pulleys, Sprockets, and Transmission Chain
CAGE: 09017 — EDO (USA)

SPECIFICATIONS

material	STEEL COMP 416 HUB
body_style	PLAIN, SOLID
bore_style	TAPERED W/KEYWAY SECOND END
tooth_form	STANDARD
pitch_diameter	3.4950 INCHES NOMINAL IN
pressure_angle	14.5000 DEGREES
teeth_quantity	168
style_designator	PROTRUDING HUB
surface_treatment	CADMIUM OVERALL
face_nominal_width	0.115 INCHES IN
hub_nominal_diameter	0.625 INCHES FIRST END IN
hub_style_designator	PLAIN FIRST END
NSN	3020-00-517-2295

COMPONENT DIAGRAM

KEY FEATURES

•

KEYWAY NOMINAL WIDTH: 0.0941 INCHES SECOND END IN

•

HUB NOMINAL DIAMETER: 0.625 INCHES FIRST END IN

•

TEETH QUANTITY: 168

•

BODY STYLE: PLAIN, SOLID

•

BORE STYLE: TAPERED W/KEYWAY SECOND END

•

NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END: 0.281 INCHES FIRST END IN

•

STYLE DESIGNATOR: PROTRUDING HUB

•

TAPER MAJOR NOMINAL DIAMETER: 0.350 INCHES SECOND END IN

TECHNICAL CHARACTERISTICS

KEYWAY NOMINAL WIDTH	0.0941 INCHES SECOND END IN
HUB NOMINAL DIAMETER	0.625 INCHES FIRST END IN
TEETH QUANTITY	168
BODY STYLE	PLAIN, SOLID
BORE STYLE	TAPERED W/KEYWAY SECOND END
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END	0.281 INCHES FIRST END IN
STYLE DESIGNATOR	PROTRUDING HUB
TAPER MAJOR NOMINAL DIAMETER	0.350 INCHES SECOND END IN
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-225/5 FED SPEC SINGLE MATERIAL RESPONSE BODY
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE HUB

SUBSTITUTES & CROSS-REFERENCES 5

210102Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

BS130-385Reference document

Same NSN cross-reference

Reference document — Secondary reference

3209320Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

102617Reference document

Same NSN cross-reference

Reference document — Secondary reference

B102617Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required

Ready to buy J104099-35?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is J104099-35?

J104099-35 is a CIRCUIT CARD ASSEMBLY.

What parts can replace J104099-35?

There are 5 known substitutes for J104099-35: 210102, BS130-385, 3209320 and 2 more. Substitute compatibility should be verified for your specific system.

What is the NSN for J104099-35?

J104099-35 is cataloged in the U.S. Government catalog under NSN 3020-00-517-2295. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

J104099-35 — CIRCUIT CARD ASSEMBLY

Request a Quote — J104099-35