PartsTable
Technical Data Sheet
Download PDF

J10005 — FILTER,FLUID

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

J10005: FILTER,FLUID.

The FILTER,FLUID is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT, case_style: SQUARE, seal_width: 0.500 INCHES NOMINAL IN, temp_rating: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF, hardness_rating: 80.0 SHORE DUROMETER A NOMINAL OVERALL, special_features: END ITEM AIR BOOSTER PUMP. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-256-1450, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
J10005
NSN: 5330-00-256-1450
NIINs: 002561450, 005967738, 014593171
FSC: 5330 — Packing and Gasket Materials
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT
case_styleSQUARE
seal_width0.500 INCHES NOMINAL IN
temp_rating-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF
hardness_rating80.0 SHORE DUROMETER A NOMINAL OVERALL
special_featuresEND ITEM AIR BOOSTER PUMP
housing_bore_diameter5.500 INCHES NOMINAL IN
sealing_element_styleANGULAR
maximum_pressure_rating7.0 POUNDS PER SQUARE INCH (PSI) LBS
accommodated_shaft_diameter4.188 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed3000 FEET PER MINUTE FT
NSN5330-00-256-1450
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: J10005 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.469 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: ANGULAR
•
HOUSING BORE DIAMETER: 4.999 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 3000 FEET PER MINUTE FT
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT DIAMETER: 4.188 INCHES NOMINAL IN
•
MATERIAL: STEEL CASE
TECHNICAL CHARACTERISTICS
SEAL WIDTH0.469 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR
HOUSING BORE DIAMETER4.999 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED3000 FEET PER MINUTE FT
CASE STYLESQUARE
ACCOMMODATED SHAFT DIAMETER4.188 INCHES NOMINAL IN
MATERIALSTEEL CASE
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
SUBSTITUTES & CROSS-REFERENCES 4
55295SReference document
Same NSN cross-reference
Reference document — Design control — primary reference
00044Reference document
Same NSN cross-reference
Reference document — Secondary reference
455295Reference document
Same NSN cross-reference
Reference document — Secondary reference
37724ASame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy J10005?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is J10005?
J10005 is a FILTER,FLUID.
What parts can replace J10005?
There are 4 known substitutes for J10005: 55295S, 00044, 455295 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for J10005?
J10005 is cataloged in the U.S. Government catalog under NSN 5330-00-256-1450. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — J10005