PartsTable
Technical Data Sheet
PartsTable / COMPONENT / J0L02US5J99YH
J0L02US5J99YH ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY RETAINER, bore_shape: STRAIGHT, bore_diameter: 0.5904 INCHES MINIMUM AND 0.5906 INCHES MAXIMUM IN, contact_angle: 25.0 DEGREES MAXIMUM, overall_width: 0.3493 INCHES MINIMUM AND 0.3543 INCHES MAXIMUM IN, load_direction: ANGULAR. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-140-5474, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
J0L02US5J99YH
NSN: 3110-00-140-5474
FSC: 3110
CAGE: 43334 — GENERAL MOTORS CORP DELCO MORAINE NDH DIV (USA)
SPECIFICATIONS
materialCOPPER ALLOY RETAINER
bore_shapeSTRAIGHT
bore_diameter0.5904 INCHES MINIMUM AND 0.5906 INCHES MAXIMUM IN
contact_angle25.0 DEGREES MAXIMUM
overall_width0.3493 INCHES MINIMUM AND 0.3543 INCHES MAXIMUM IN
load_directionANGULAR
surface_finishGROUND
special_featuresINNER RING SHOULDERED
style_designatorCOUNTERBORED OUTER RING, NON-SEPARABLE
internal_clearance0.0008 INCHES MINIMUM RADIAL AND 0.0011 INCHES MAXIMUM RADIAL IN
lubrication_materialOIL
overall_outside_diameter1.2596 INCHES MINIMUM AND 1.2598 INCHES MAXIMUM IN
NSN3110-00-140-5474
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: J0L02US5J99YH · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.5
•
SURFACE FINISH: GROUND
•
MATERIAL: STEEL COMP E51100 OR STEEL COMP E52100 BALL
•
STYLE DESIGNATOR: COUNTERBORED OUTER RING, NON-SEPARABLE
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESINNER RING SHOULDERED
STANDARD TOLERANCE DESIGNATIONABEC NO.5
SURFACE FINISHGROUND
MATERIALSTEEL COMP E51100 OR STEEL COMP E52100 BALL
MATERIALSTEEL COMP E52100 OUTER RING
MATERIALSTEEL COMP E52100 INNER RING
MATERIALCOPPER ALLOY RETAINER
STYLE DESIGNATORCOUNTERBORED OUTER RING, NON-SEPARABLE
INTERNAL CLEARANCE0.0008 INCHES MINIMUM RADIAL AND 0.0011 INCHES MAXIMUM RADIAL IN
LOAD DIRECTIONANGULAR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
903509C1Interchangeable
interchangeable cross-reference
interchangeable
2-219V1226-75Interchangeable
interchangeable cross-reference
interchangeable
892929-1Interchangeable
Same NIIN cross-reference
interchangeable
102BJ5X120-11Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy J0L02US5J99YH?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is J0L02US5J99YH?
J0L02US5J99YH is a BEARING,BALL,ANNULAR.
What parts can replace J0L02US5J99YH?
There are 4 known substitutes for J0L02US5J99YH: 903509C1, 2-219V1226-75, 892929-1 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for J0L02US5J99YH?
J0L02US5J99YH is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-140-5474. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — J0L02US5J99YH

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026