PartsTable
Technical Data Sheet
PartsTable / COMPONENT / J-8814
J-8814 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The REAMER,HAND is a the manufacturer industrial component. Key specifications include diameter: 0.350 INCHES NOMINAL IN, material: STEEL, head_style: HEXAGON, pilot_type: FLUTED, shank_type: STRAIGHT ROUND W/SQUARE END, grip_length: 8.000 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-346-9966, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
J-8814
NSN: 5306-00-346-9966
FSC: 5306
CAGE: 74999 — JOSLYN CORP (USA)
SPECIFICATIONS
diameter0.350 INCHES NOMINAL IN
materialSTEEL
head_styleHEXAGON
pilot_typeFLUTED
shank_typeSTRAIGHT ROUND W/SQUARE END
grip_length8.000 INCHES NOMINAL IN
head_height0.378 INCHES MINIMUM AND 0.403 INCHES MAXIMUM IN
reamer_typeHAND
flute_designSPIRAL
flute_length4.000 INCHES NOMINAL IN
thread_class2A A
thread_length6.000 INCHES NOMINAL IN
NSN5306-00-346-9966
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: J-8814 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
GRIP LENGTH: 8.000 INCHES NOMINAL IN
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD DIAMETER: 0.625 INCHES IN
•
FEATURES PROVIDED: FINISHED HEAD
•
THREAD QUANTITY PER INCH: 11
•
HEAD HEIGHT: 0.378 INCHES MINIMUM AND 0.403 INCHES MAXIMUM IN
•
FASTENER LENGTH: 14.000 INCHES NOMINAL IN
•
THREAD CLASS: 2A A
TECHNICAL CHARACTERISTICS (FLIS)
GRIP LENGTH8.000 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD DIAMETER0.625 INCHES IN
FEATURES PROVIDEDFINISHED HEAD
THREAD QUANTITY PER INCH11
HEAD HEIGHT0.378 INCHES MINIMUM AND 0.403 INCHES MAXIMUM IN
FASTENER LENGTH14.000 INCHES NOMINAL IN
THREAD CLASS2A A
SURFACE TREATMENTZINC OVERALL
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
6114Upgraded Successor
successor cross-reference
successor
9814Upgraded Successor
successor cross-reference
successor
8814Upgraded Successor
successor cross-reference
successor
F91G162Upgraded Successor
successor cross-reference
successor
97-0442Upgraded Successor
successor cross-reference
successor
4129726012Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy J-8814?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is J-8814?
J-8814 is a REAMER,HAND.
What parts can replace J-8814?
There are 14 known substitutes for J-8814: 6114, 9814, 8814 and 11 more. Substitute compatibility should be verified for your specific system.
Is J-8814 still available?
J-8814 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — J-8814

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026