PartsTable
Technical Data Sheet
PartsTable / COMPONENT / J-85-OH
J-85-OH ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL COMP E52100 OVERALL, bore_diameter: 0.5000 INCHES NOMINAL IN, overall_width: 0.3120 INCHES NOMINAL IN, alignment_type: RIGID, surface_finish: GROUND, style_designator: NON-SEPARABLE, WITH ROLLER RETAINER, OPEN END, DRAWN SHELL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-037-8250, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
J-85-OH
NSN: 3110-01-037-8250
FSC: 3110
CAGE: 60380 — TIMKEN AEROSPACE, INC DBA TORRINGTON PRODUCT (USA)
SPECIFICATIONS
materialSTEEL COMP E52100 OVERALL
bore_diameter0.5000 INCHES NOMINAL IN
overall_width0.3120 INCHES NOMINAL IN
alignment_typeRIGID
surface_finishGROUND
style_designatorNON-SEPARABLE, WITH ROLLER RETAINER, OPEN END, DRAWN SHELL
overall_outside_diameter0.6875 INCHES NOMINAL IN
retainer_fabrication_methodPRESSED
standard_tolerance_designationAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
material_document_and_classification66 FED STD SINGLE MATERIAL RESPONSE OVERALL
NSN3110-01-037-8250
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: J-85-OH · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NON-SEPARABLE, WITH ROLLER RETAINER, OPEN END, DRAWN SHELL
•
MATERIAL: STEEL COMP E52100 OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE OVERALL
•
RETAINER FABRICATION METHOD: PRESSED
•
OVERALL OUTSIDE DIAMETER: 0.6875 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
•
SURFACE FINISH: GROUND
•
BORE DIAMETER: 0.5000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORNON-SEPARABLE, WITH ROLLER RETAINER, OPEN END, DRAWN SHELL
MATERIALSTEEL COMP E52100 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD SINGLE MATERIAL RESPONSE OVERALL
RETAINER FABRICATION METHODPRESSED
OVERALL OUTSIDE DIAMETER0.6875 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
SURFACE FINISHGROUND
BORE DIAMETER0.5000 INCHES NOMINAL IN
OVERALL WIDTH0.3120 INCHES NOMINAL IN
ALIGNMENT TYPERIGID
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
67706Interchangeable
interchangeable cross-reference
interchangeable
AX5Interchangeable
interchangeable cross-reference
interchangeable
J85Interchangeable
interchangeable cross-reference
interchangeable
C04447Interchangeable
Same NIIN cross-reference
interchangeable
J850HInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy J-85-OH?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is J-85-OH?
J-85-OH is a BEARING,ROLLER,NEEDLE.
What parts can replace J-85-OH?
There are 5 known substitutes for J-85-OH: 67706, AX5, J85 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for J-85-OH?
J-85-OH is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-037-8250. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — J-85-OH

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026