PartsTable
Technical Data Sheet
PartsTable / COMPONENT / J-317-3-3A-4A
J-317-3-3A-4A ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include seat_angle: 37.0 DEGREES FIRST END, temp_rating: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF, thread_class: 3B FIRST END, connection_type: THREADED INTERNAL TUBE FIRST END, inside_diameter: 0.735 INCHES MINIMUM AND 0.781 INCHES MAXIMUM IN, connection_style: SWIVEL NUT FLARE FIRST END. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-192-1587, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
J-317-3-3A-4A
NSN: 4720-01-192-1587
FSC: 4720
CAGE: 16288 — METSO MINERALS INDUSTRIES, INC. DBA BULK MATERIAL HANDLING (USA)
SPECIFICATIONS
seat_angle37.0 DEGREES FIRST END
temp_rating-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
thread_class3B FIRST END
connection_typeTHREADED INTERNAL TUBE FIRST END
inside_diameter0.735 INCHES MINIMUM AND 0.781 INCHES MAXIMUM IN
connection_styleSWIVEL NUT FLARE FIRST END
outside_diameter1.203 INCHES MINIMUM AND 1.265 INCHES MAXIMUM IN
special_featuresEXTERNAL PROTECTION TYPE AND LOCATION- OVERALL SPRING GUARD, ROUND CORROSION RESISTING STEEL COIL , INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC
thread_directionRIGHT-HAND FIRST END
features_providedREUSABLE END FITTINGS
operating_pressure2250.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure9000.0 POUNDS PER SQUARE INCH LBS
NSN4720-01-192-1587
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: J-317-3-3A-4A · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INSIDE SURFACE CONDITION: SMOOTH
•
MEDIA FOR WHICH DESIGNED: FUEL/OIL, HYDROCARBON SINGLE RESPONSE
•
FITTING COMPONENT AND SURFACE TREATMENT: COMPLETE FITTING CADMIUM FIRST END
•
CONNECTION TYPE: THREADED INTERNAL TUBE FIRST END
•
THREAD DIRECTION: RIGHT-HAND FIRST END
•
THREAD QUANTITY PER INCH: 12 FIRST END
•
OUTSIDE DIAMETER: 1.203 INCHES MINIMUM AND 1.265 INCHES MAXIMUM IN
•
CONNECTION STYLE: SWIVEL NUT FLARE FIRST END
TECHNICAL CHARACTERISTICS (FLIS)
INSIDE SURFACE CONDITIONSMOOTH
MEDIA FOR WHICH DESIGNEDFUEL/OIL, HYDROCARBON SINGLE RESPONSE
FITTING COMPONENT AND SURFACE TREATMENTCOMPLETE FITTING CADMIUM FIRST END
CONNECTION TYPETHREADED INTERNAL TUBE FIRST END
THREAD DIRECTIONRIGHT-HAND FIRST END
THREAD QUANTITY PER INCH12 FIRST END
OUTSIDE DIAMETER1.203 INCHES MINIMUM AND 1.265 INCHES MAXIMUM IN
CONNECTION STYLESWIVEL NUT FLARE FIRST END
END CONNECTION DESIGNSTRAIGHT FIRST END
END FITTING COMPONENT AND MATERIALCOMPLETE FITTING STEEL ALL ENDS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
7633003P2Interchangeable
interchangeable cross-reference
interchangeable
J3173Interchangeable
interchangeable cross-reference
interchangeable
7633003P2REVBInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy J-317-3-3A-4A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is J-317-3-3A-4A?
J-317-3-3A-4A is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace J-317-3-3A-4A?
There are 3 known substitutes for J-317-3-3A-4A: 7633003P2, J3173, 7633003P2REVB. Substitute compatibility should be verified for your specific system.
What is the NSN for J-317-3-3A-4A?
J-317-3-3A-4A is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-192-1587. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — J-317-3-3A-4A

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026