J-20-F2-P2 — RESISTOR,VARIABLE,WIRE WOUND,NON

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

J-20-F2-P2: RESISTOR,VARIABLE,WIRE WOUND,NON.

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include body_style: CYLINDRICAL BUSHING MOUNTED, body_length: 1.375 INCHES NOMINAL IN, flat_height: 0.219 INCHES NOMINAL IN, shaft_style: ROUND, FLATTED, shaft_length: 2.312 INCHES NOMINAL IN, actuator_type: SINGLE SHAFT. This part is cataloged in the U.S.

Government catalog under NSN 5905-00-112-4399, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ J-20-F2-P2

NSN: 5905-00-112-4399
FSC: 5905 — Resistor
CAGE: 44655 — OHMITE HOLDING, L.L.C. DBA OHMITE MANUFACTURING (USA)

SPECIFICATIONS

body_style	CYLINDRICAL BUSHING MOUNTED
body_length	1.375 INCHES NOMINAL IN
flat_height	0.219 INCHES NOMINAL IN
shaft_style	ROUND, FLATTED
shaft_length	2.312 INCHES NOMINAL IN
actuator_type	SINGLE SHAFT
body_diameter	2.312 INCHES NOMINAL IN
shaft_diameter	0.250 INCHES NOMINAL IN
mounting_method	STANDARD BUSHING
section_quantity	2
first_flat_length	0.688 INCHES NOMINAL IN
terminal_location	RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE LOCATION NOT OTHERWISE SPECIFIED
NSN	5905-00-112-4399

COMPONENT DIAGRAM

KEY FEATURES

•

BODY DIAMETER: 2.312 INCHES NOMINAL IN

•

SCREW THREAD QUANTITY PER INCH: 32.0

•

ELECTRICAL RESISTANCE PER SECTION: 20.0 OHMS ALL SECTIONS

•

AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER: 340.0 ALL SECTIONS

•

SECTION QUANTITY: 2

•

SHAFT DIAMETER: 0.250 INCHES NOMINAL IN

•

BODY STYLE: CYLINDRICAL BUSHING MOUNTED

•

FIRST FLAT LENGTH: 0.688 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

BODY DIAMETER	2.312 INCHES NOMINAL IN
SCREW THREAD QUANTITY PER INCH	32.0
ELECTRICAL RESISTANCE PER SECTION	20.0 OHMS ALL SECTIONS
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	340.0 ALL SECTIONS
SECTION QUANTITY	2
SHAFT DIAMETER	0.250 INCHES NOMINAL IN
BODY STYLE	CYLINDRICAL BUSHING MOUNTED
FIRST FLAT LENGTH	0.688 INCHES NOMINAL IN
MOUNTING METHOD	STANDARD BUSHING
TERMINAL LOCATION	RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE LOCATION NOT OTHERWISE SPECIFIED

SUBSTITUTES & CROSS-REFERENCES 2

5895Reference document

Same NSN cross-reference

Reference document — Secondary reference

J6601Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required

Ready to buy J-20-F2-P2?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is J-20-F2-P2?

J-20-F2-P2 is a RESISTOR,VARIABLE,WIRE WOUND,NON. It is classified as a MRO (MRO_GENERAL).

What parts can replace J-20-F2-P2?

There are 2 known substitutes for J-20-F2-P2: 5895, J6601. Substitute compatibility should be verified for your specific system.

What is the NSN for J-20-F2-P2?

J-20-F2-P2 is cataloged in the U.S. Government catalog under NSN 5905-00-112-4399. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

J-20-F2-P2 — RESISTOR,VARIABLE,WIRE WOUND,NON

Request a Quote — J-20-F2-P2