The MOUNT,RESILIENT,UTILITY is a the manufacturer industrial component. Key specifications include length: 2.390 INCHES NOMINAL IN, diameter: 0.811 INCHES NOMINAL IN, material: ALUMINUM ALLOY OVERALL, special_features: SET = 8, surface_treatment: CHROMATE OVERALL, fsc_application_data: OPERATING TEMPERATURE RANGE: -65 DEGREES FAHRENHEIT TO +300 DEGREES FAHRENHEIT. This part is cataloged in the U.S.
Government catalog under NSN 5340-01-503-2013, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
OPERATING TEMPERATURE RANGE: -65 DEGREES FAHRENHEIT TO +300 DEGREES FAHRENHEIT
special_test_features
MAJOR METALS: ALUMINUM ALLOY, UNS J92024, TEMPER T351, SPEC SAE-AMS-QQ-A-225/6; FINISH; CHROMATE CLASS 1A; SPEC MIL-DTL-5541; ELASTOMER MATERIAL: SILICONE A
end_item_identification
XM23 MORTAR BALLISTIC COMPUTER
specification/standard_data
05047-ASME Y14.100 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD AND 80204-ANSI Y14.5M-1982 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
material_document_and_classification
0U583-SAE-AMS-QQ-A-225/6 NATIONAL STD SINGLE MATERIAL RESPONSE OVERALL
distance_between_mounting_hole_centers
1.940 INCHES NOMINAL IN
part_name_assigned_by_controlling_agency
POINTING DEVICE MOUNT ISOLATOR SET
NSN
5340-01-503-2013
COMPONENT DIAGRAM
KEY FEATURES
•
FSC APPLICATION DATA: OPERATING TEMPERATURE RANGE: -65 DEGREES FAHRENHEIT TO +300 DEGREES FAHRENHEIT
•
LENGTH: 2.390 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: 96906-MIL-DTL-5541 MIL STD SINGLE TREATMENT RESPONSE OVERALL
•
DISTANCE BETWEEN MOUNTING HOLE CENTERS: 1.940 INCHES NOMINAL IN
•
SPECIAL TEST FEATURES: MAJOR METALS: ALUMINUM ALLOY, UNS J92024, TEMPER T351, SPEC SAE-AMS-QQ-A-225/6; FINISH; CHROMATE CLASS 1A; SPEC MIL-DTL-5541; ELASTOMER MATERIAL: SILICONE A
•
MATERIAL DOCUMENT AND CLASSIFICATION: 0U583-SAE-AMS-QQ-A-225/6 NATIONAL STD SINGLE MATERIAL RESPONSE OVERALL
•
DIAMETER: 0.811 INCHES NOMINAL IN
•
SPECIFICATION/STANDARD DATA: 05047-ASME Y14.100 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD AND 80204-ANSI Y14.5M-1982 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
TECHNICAL CHARACTERISTICS
FSC APPLICATION DATA
OPERATING TEMPERATURE RANGE: -65 DEGREES FAHRENHEIT TO +300 DEGREES FAHRENHEIT
LENGTH
2.390 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
96906-MIL-DTL-5541 MIL STD SINGLE TREATMENT RESPONSE OVERALL
DISTANCE BETWEEN MOUNTING HOLE CENTERS
1.940 INCHES NOMINAL IN
SPECIAL TEST FEATURES
MAJOR METALS: ALUMINUM ALLOY, UNS J92024, TEMPER T351, SPEC SAE-AMS-QQ-A-225/6; FINISH; CHROMATE CLASS 1A; SPEC MIL-DTL-5541; ELASTOMER MATERIAL: SILICONE A
MATERIAL DOCUMENT AND CLASSIFICATION
0U583-SAE-AMS-QQ-A-225/6 NATIONAL STD SINGLE MATERIAL RESPONSE OVERALL
DIAMETER
0.811 INCHES NOMINAL IN
SPECIFICATION/STANDARD DATA
05047-ASME Y14.100 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD AND 80204-ANSI Y14.5M-1982 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SPECIAL FEATURES
SET = 8
SURFACE TREATMENT
CHROMATE OVERALL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is J-19116-10?
J-19116-10 is a MOUNT,RESILIENT,UTILITY.
What parts can replace J-19116-10?
There is 1 known substitute for J-19116-10: 12992845. Substitute compatibility should be verified for your specific system.
What is the NSN for J-19116-10?
J-19116-10 is cataloged in the U.S. Government catalog under NSN 5340-01-503-2013. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.