PartsTable
Technical Data Sheet
PartsTable / COMPONENT / J-113
J-113 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The TRANSISTOR is a the manufacturer industrial component. Key specifications include material: PLASTIC ENCLOSURE, hole_diameter: 0.688 INCHES NOMINAL IN, overall_width: 0.145 INCHES NOMINAL IN, overall_height: 0.670 INCHES MINIMUM IN, overall_length: 0.190 INCHES NOMINAL IN, mounting_method: TERMINAL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-250-6027, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
J-113
NSN: 5310-00-250-6027
FSC: 5310
CAGE: 74999 — JOSLYN CORP (USA)
SPECIFICATIONS
materialPLASTIC ENCLOSURE
hole_diameter0.688 INCHES NOMINAL IN
overall_width0.145 INCHES NOMINAL IN
overall_height0.670 INCHES MINIMUM IN
overall_length0.190 INCHES NOMINAL IN
mounting_methodTERMINAL
terminal_length0.070 INCHES MINIMUM IN
overall_diameter0.215 INCHES MAXIMUM IN
style_designatorSADDLE
surface_treatmentZINC OVERALL
material_thickness0.250 INCHES NOMINAL IN
internal_configurationFIELD EFFECT
NSN5310-00-250-6027
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: J-113 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OVERALL
•
MATERIAL THICKNESS: 0.250 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.688 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: ASTM A-153 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
•
STYLE DESIGNATOR: SADDLE
•
SURFACE TREATMENT: ZINC OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL LENGTH3.000 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
MATERIAL THICKNESS0.250 INCHES NOMINAL IN
HOLE DIAMETER0.688 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONASTM A-153 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
OVERALL WIDTH3.000 INCHES NOMINAL IN
STYLE DESIGNATORSADDLE
SURFACE TREATMENTZINC OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A575 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
10070320Interchangeable
interchangeable cross-reference
interchangeable
048894-0001Interchangeable
interchangeable cross-reference
interchangeable
J113Interchangeable
interchangeable cross-reference
interchangeable
1-240113-0Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy J-113?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is J-113?
J-113 is a TRANSISTOR.
What parts can replace J-113?
There are 4 known substitutes for J-113: 10070320, 048894-0001, J113 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for J-113?
J-113 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-250-6027. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — J-113

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026