PartsTable
Technical Data Sheet
Download PDF

ITR25-260SD — PIN-RIVET

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

ITR25-260SD: PIN-RIVET.

The PIN-RIVET is a the manufacturer industrial component. Key specifications include length: 0.710 INCHES NOMINAL IN, material: STEEL OVERALL, grip_length: 0.340 INCHES MAXIMUM IN, insert_size: 0.390 INCHES IS THE O.D. IN, thread_class: 2B, thread_length: 0.665 INCHES MINIMUM AND 0.695 INCHES MAXIMUM IN.

This part is cataloged in the U.S. Government catalog under NSN 5320-01-467-4331, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ITR25-260SD
NSN: 5320-01-467-4331
NIINs: 014674331, 015710345, 016309182
FSC: 5320 — Rivets
CAGE: 3H464 — BOLLHOFF INC. DBA BOLLHOFF RIVNUT INC (USA)
SPECIFICATIONS
length0.710 INCHES NOMINAL IN
materialSTEEL OVERALL
grip_length0.340 INCHES MAXIMUM IN
insert_size0.390 INCHES IS THE O.D. IN
thread_class2B
thread_length0.665 INCHES MINIMUM AND 0.695 INCHES MAXIMUM IN
shank_diameter0.390 INCHES MAXIMUM IN
fastener_length0.720 INCHES MAXIMUM IN
flange_diameter0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
flange_thickness0.030 INCHES NOMINAL IN
style_designatorFLANGE
thread_directionRIGHT-HAND
NSN5320-01-467-4331
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available PIN-RIVET TITLE COMPONENT PN ITR25-260SD MFR PIN-RIVET
KEY FEATURES
•
SHANK DIAMETER: 0.390 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.720 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: ASTMB633FE/ZN8TYPE2 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.250 INCHES IN
•
GRIP LENGTH: 0.340 INCHES MAXIMUM IN
•
SURFACE TREATMENT: ZINC OVERALL
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.390 INCHES MAXIMUM IN
FASTENER LENGTH0.720 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONASTMB633FE/ZN8TYPE2 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.250 INCHES IN
GRIP LENGTH0.340 INCHES MAXIMUM IN
SPECIAL FEATURESMATERIAL THICKNESS (GRIP RANGE) 0.165-0.260;INSTALL HOLE SIZE 0.391-0.397;LARGE HEAD AND RIBBED SHANK;WIDE GRIP RANGE;UPSET LOAD (LBS)1823-2130;TORQUE-OUT (INCH-POUNDS) 240-250;PULL-OUT (POUNDS) 1230-2700
SURFACE TREATMENTZINC OVERALL
THREAD CLASS2B
END ITEM IDENTIFICATIONSTRIKER,XM707
SUBSTITUTES & CROSS-REFERENCES 1
17-2-0253-8Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy ITR25-260SD?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ITR25-260SD?
ITR25-260SD is a PIN-RIVET.
What parts can replace ITR25-260SD?
There is 1 known substitute for ITR25-260SD: 17-2-0253-8. Substitute compatibility should be verified for your specific system.
What is the NSN for ITR25-260SD?
ITR25-260SD is cataloged in the U.S. Government catalog under NSN 5320-01-467-4331. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ITR25-260SD

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.