ISO7046M2X5-A2-70-H — SCREW,MACHINE

✓ Government record, cited

— · BOLT SCREW

PRODUCT OVERVIEW

ISO7046M2X5-A2-70-H: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, head_diameter: 3.5 MILLIMETERS MINIMUM AND 3.8 MILLIMETERS MAXIMUM MM, thread_length: 3.8 MILLIMETERS NOMINAL MM, screw_material: STEEL CORROSION RESISTING, fastener_length: 5.0 MILLIMETERS NOMINAL MM, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-390-6495, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

ISO7046M2X5-A2-70-H

NSN: 5305-01-390-6495
FSC: 5305 — Screws
CAGE: I9008 — INTERNATIONAL ORGANIZATION FOR STANDARDIZATION (ISO) (CHE)

SPECIFICATIONS

head_style	FLAT COUNTERSUNK
head_diameter	3.5 MILLIMETERS MINIMUM AND 3.8 MILLIMETERS MAXIMUM MM
thread_length	3.8 MILLIMETERS NOMINAL MM
screw_material	STEEL CORROSION RESISTING
fastener_length	5.0 MILLIMETERS NOMINAL MM
thread_direction	RIGHT-HAND
countersink_angle	90.0 DEGREES MINIMUM AND 92.0 DEGREES MAXIMUM
internal_drive_style	CROSS RECESS TYPE 1
nominal_thread_diameter	2.0 MILLIMETERS MM
thread_series_designator	M
thread_pitch_in_millimeters	0.4
external_thread_tolerance_class	6G G
NSN	5305-01-390-6495

COMPONENT DIAGRAM

KEY FEATURES

•

EXTERNAL THREAD TOLERANCE CLASS: 6G G

•

FASTENER LENGTH: 5.0 MILLIMETERS NOMINAL MM

•

SCREW MATERIAL DOCUMENT AND CLASSIFICATION: DIN267 PART 11 NATIONAL SPEC SINGLE MATERIAL RESPONSE

•

THREAD PITCH IN MILLIMETERS: 0.4

•

THREAD LENGTH: 3.8 MILLIMETERS NOMINAL MM

•

NOMINAL THREAD DIAMETER: 2.0 MILLIMETERS MM

•

HEAD STYLE: FLAT COUNTERSUNK

•

THREAD DIRECTION: RIGHT-HAND

TECHNICAL CHARACTERISTICS

EXTERNAL THREAD TOLERANCE CLASS	6G G
FASTENER LENGTH	5.0 MILLIMETERS NOMINAL MM
SCREW MATERIAL DOCUMENT AND CLASSIFICATION	DIN267 PART 11 NATIONAL SPEC SINGLE MATERIAL RESPONSE
THREAD PITCH IN MILLIMETERS	0.4
THREAD LENGTH	3.8 MILLIMETERS NOMINAL MM
NOMINAL THREAD DIAMETER	2.0 MILLIMETERS MM
HEAD STYLE	FLAT COUNTERSUNK
THREAD DIRECTION	RIGHT-HAND
SCREW MATERIAL	STEEL CORROSION RESISTING
INTERNAL DRIVE STYLE	CROSS RECESS TYPE 1

OTHER ITEMS IN FSC 5305 — Screws

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831

SUBSTITUTES & CROSS-REFERENCES 2

DIN965-M2X5-A2-70-HSame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

DIN965-M2X5-A2- HReference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy ISO7046M2X5-A2-70-H?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is ISO7046M2X5-A2-70-H?

ISO7046M2X5-A2-70-H is a SCREW,MACHINE.

What parts can replace ISO7046M2X5-A2-70-H?

There are 2 known substitutes for ISO7046M2X5-A2-70-H: DIN965-M2X5-A2-70-H, DIN965-M2X5-A2- H. Substitute compatibility should be verified for your specific system.

What is the NSN for ISO7046M2X5-A2-70-H?

ISO7046M2X5-A2-70-H is cataloged in the U.S. Government catalog under NSN 5305-01-390-6495. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

ISO7046M2X5-A2-70-H — SCREW,MACHINE

Request a Quote — ISO7046M2X5-A2-70-H