PartsTable
Technical Data Sheet
PartsTable / COMPONENT / ISO7045-M4X30-4.8-H-ZNNI/FN/T7
ISO7045-M4X30-4.8-H-ZNNI/FN/T7 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The ISO7045-M4X30-4.8-H-ZNNI/FN/T7 is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-01-733-3904, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ISO7045-M4X30-4.8-H-ZNNI/FN/T7
NSN: 5305-01-733-3904
FSC: 5305
CAGE: I9008 — INTERNATIONAL ORGANIZATION FOR STANDARDIZATION (ISO) (CHE)
SPECIFICATIONS
Part NumberISO7045-M4X30-4.8-H-ZNNI/FN/T7
NSN5305-01-733-3904
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: ISO7045-M4X30-4.8-H-ZNNI/FN/T7 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SPECIFICATION/STANDARD DATA: I9008-ISO 7045 INTERNATIONAL STD/SPEC
•
THREAD LENGTH: 29.58 MILLIMETERS MINIMUM AND 30.42 MILLIMETERS MAXIMUM MM
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: ISO898-1 INTERNATIONAL STD/SPEC SINGLE MATERIAL RESPONSE
•
THREAD SERIES DESIGNATOR: M
•
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: ISO4042 INTERNATIONAL STD/SPEC SINGLE TREATMENT RESPONSE
•
THREAD PITCH IN MILLIMETERS: 0.7
•
HEAD HEIGHT: 2.92 MILLIMETERS MINIMUM AND 3.10 MILLIMETERS MAXIMUM MM
TECHNICAL CHARACTERISTICS (FLIS)
SPECIFICATION/STANDARD DATAI9008-ISO 7045 INTERNATIONAL STD/SPEC
PART NAME ASSIGNED BY CONTROLLING AGENCYPAN HEAD SCREWS WITH TYPE H OR TYPE Z CROSS RECESS - PRODUCT GRADE A
THREAD LENGTH29.58 MILLIMETERS MINIMUM AND 30.42 MILLIMETERS MAXIMUM MM
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONISO898-1 INTERNATIONAL STD/SPEC SINGLE MATERIAL RESPONSE
THREAD SERIES DESIGNATORM
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONISO4042 INTERNATIONAL STD/SPEC SINGLE TREATMENT RESPONSE
THREAD PITCH IN MILLIMETERS0.7
HEAD HEIGHT2.92 MILLIMETERS MINIMUM AND 3.10 MILLIMETERS MAXIMUM MM
NOMINAL THREAD DIAMETER4.0 MILLIMETERS MM
HEAD STYLEPAN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
BN384 M4X8Interchangeable
interchangeable cross-reference
interchangeable
12414575-038Interchangeable
interchangeable cross-reference
interchangeable
DIN7985-M4X8-4. 8-A2LInterchangeable
interchangeable cross-reference
interchangeable
10505601Interchangeable
interchangeable cross-reference
interchangeable
DIN7985-M5X18-4.8-A2LInterchangeable
interchangeable cross-reference
interchangeable
ISO7045-M5X18-4.8-A2LInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy ISO7045-M4X30-4.8-H-ZNNI/FN/T7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ISO7045-M4X30-4.8-H-ZNNI/FN/T7?
ISO7045-M4X30-4.8-H-ZNNI/FN/T7 is a ISO7045-M4X30-4.8-H-ZNNI/FN/T7.
What parts can replace ISO7045-M4X30-4.8-H-ZNNI/FN/T7?
There are 8 known substitutes for ISO7045-M4X30-4.8-H-ZNNI/FN/T7: BN384 M4X8, 12414575-038, DIN7985-M4X8-4. 8-A2L and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for ISO7045-M4X30-4.8-H-ZNNI/FN/T7?
ISO7045-M4X30-4.8-H-ZNNI/FN/T7 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-01-733-3904. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ISO7045-M4X30-4.8-H-ZNNI/FN/T7

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026