PartsTable
Technical Data Sheet
PartsTable / COMPONENT / ISO4762-M8X40-8.8-A2L
ISO4762-M8X40-8.8-A2L ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The ISO4762-M8X40-8.8-A2L is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-01-162-0657, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ISO4762-M8X40-8.8-A2L
NSN: 5305-01-162-0657
FSC: 5305
CAGE: I9008 — INTERNATIONAL ORGANIZATION FOR STANDARDIZATION (ISO) (CHE)
SPECIFICATIONS
Part NumberISO4762-M8X40-8.8-A2L
NSN5305-01-162-0657
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: ISO4762-M8X40-8.8-A2L · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD DIRECTION: RIGHT-HAND
•
EXTERNAL THREAD TOLERANCE CLASS: 6G G
•
WIDTH ACROSS FLATS: 6.0 MILLIMETERS NOMINAL MM
•
SURFACE TREATMENT: ZINC OVERALL
•
THREAD SERIES DESIGNATOR: M
•
MATERIAL DOCUMENT AND CLASSIFICATION: DIN912 8.8 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
HEAD STYLE: FLAT CHAMFER
•
FASTENER LENGTH: 40.0 MILLIMETERS NOMINAL MM
TECHNICAL CHARACTERISTICS (FLIS)
THREAD DIRECTIONRIGHT-HAND
EXTERNAL THREAD TOLERANCE CLASS6G G
WIDTH ACROSS FLATS6.0 MILLIMETERS NOMINAL MM
SURFACE TREATMENTZINC OVERALL
THREAD SERIES DESIGNATORM
MATERIAL DOCUMENT AND CLASSIFICATIONDIN912 8.8 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
HEAD STYLEFLAT CHAMFER
FASTENER LENGTH40.0 MILLIMETERS NOMINAL MM
HEAD DIAMETER17.0 MILLIMETERS NOMINAL MM
NOMINAL THREAD DIAMETER8.0 MILLIMETERS MM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
10501900Interchangeable
interchangeable cross-reference
interchangeable
111042Interchangeable
interchangeable cross-reference
interchangeable
000912008063Interchangeable
Same NIIN cross-reference
interchangeable
DIN912-M8X40-8.8-A2LInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy ISO4762-M8X40-8.8-A2L?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ISO4762-M8X40-8.8-A2L?
ISO4762-M8X40-8.8-A2L is a ISO4762-M8X40-8.8-A2L.
What parts can replace ISO4762-M8X40-8.8-A2L?
There are 4 known substitutes for ISO4762-M8X40-8.8-A2L: 10501900, 111042, 000912008063 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for ISO4762-M8X40-8.8-A2L?
ISO4762-M8X40-8.8-A2L is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-01-162-0657. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ISO4762-M8X40-8.8-A2L

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026