PartsTable
Technical Data Sheet
Download PDF

ISO4032-M10-8-A2R — NUT,PLAIN,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

ISO4032-M10-8-A2R: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: HEXAGON, nut_height: 8.4 MILLIMETERS MAXIMUM MM, thread_class: 6H, thread_direction: RIGHT-HAND, surface_treatment: ZINC OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-664-8285, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ISO4032-M10-8-A2R
NSN: 5310-01-664-8285
FSC: 5310 — Nuts and Washers
CAGE: I9008 — INTERNATIONAL ORGANIZATION FOR STANDARDIZATION (ISO) (CHE)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleHEXAGON
nut_height8.4 MILLIMETERS MAXIMUM MM
thread_class6H
thread_seriesM
thread_directionRIGHT-HAND
surface_treatmentZINC OVERALL
width_across_flats16.0 MILLIMETERS NOMINAL MM
nominal_thread_size10.0 MILLIMETERS MM
bearing_surface_typeCHAMFERED
end_item_identificationMEDIUM MINE PROTECTED VEHICLE - MMPV
thread_pitch_in_millimeters1.5
NSN5310-01-664-8285
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: ISO4032-M10-8-A2R · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 16.0 MILLIMETERS NOMINAL MM
•
THREAD SERIES: M
•
THREAD PITCH IN MILLIMETERS: 1.5
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 10.0 MILLIMETERS MM
•
NUT HEIGHT: 8.4 MILLIMETERS MAXIMUM MM
•
SURFACE TREATMENT: ZINC OVERALL
•
NUT STYLE: HEXAGON
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS16.0 MILLIMETERS NOMINAL MM
THREAD SERIESM
THREAD PITCH IN MILLIMETERS1.5
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE10.0 MILLIMETERS MM
NUT HEIGHT8.4 MILLIMETERS MAXIMUM MM
SURFACE TREATMENTZINC OVERALL
NUT STYLEHEXAGON
THREAD CLASS6H
END ITEM IDENTIFICATIONMEDIUM MINE PROTECTED VEHICLE - MMPV
SUBSTITUTES & CROSS-REFERENCES 2
R2003111Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
A34991Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy ISO4032-M10-8-A2R?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ISO4032-M10-8-A2R?
ISO4032-M10-8-A2R is a NUT,PLAIN,HEXAGON.
What parts can replace ISO4032-M10-8-A2R?
There are 2 known substitutes for ISO4032-M10-8-A2R: R2003111, A34991. Substitute compatibility should be verified for your specific system.
What is the NSN for ISO4032-M10-8-A2R?
ISO4032-M10-8-A2R is cataloged in the U.S. Government catalog under NSN 5310-01-664-8285. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ISO4032-M10-8-A2R

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.