ISO4017 — SCREW,CAP,HEXAGON HEAD

✓ Government record, cited

— · BOLT SCREW

PRODUCT OVERVIEW

ISO4017: SCREW,CAP,HEXAGON HEAD.

The SCREW,CAP,HEXAGON HEAD is a the manufacturer industrial component. Key specifications include material: STEEL PROPERTY CLASS 10.9 OVERALL, head_style: HEXAGON, head_height: 6.22 MILLIMETERS MINIMUM AND 6.58 MILLIMETERS MAXIMUM MM, thread_class: 6G G, chamfer_angle: 15.0 DEGREES MINIMUM AND 30.0 DEGREES MAXIMUM, head_diameter: 19.6 MILLIMETERS NOMINAL MM. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-155-5437, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

ISO4017

NSN: 5305-01-155-5437
NIINs: 011555437, 011555440, 011566217, 011580826, 011580827, 011580830, 011580831, 014726441, 015476220, 015478978, 015478988, 017334516, 017355106, 017357007, 017357011, 017357122, 017357155, 017357306, 017357328, 017357381, 017362661
FSC: 5305 — Screws
CAGE: I9008 — INTERNATIONAL ORGANIZATION FOR STANDARDIZATION (ISO) (CHE)

SPECIFICATIONS

material	STEEL PROPERTY CLASS 10.9 OVERALL
head_style	HEXAGON
head_height	6.22 MILLIMETERS MINIMUM AND 6.58 MILLIMETERS MAXIMUM MM
thread_class	6G G
chamfer_angle	15.0 DEGREES MINIMUM AND 30.0 DEGREES MAXIMUM
head_diameter	19.6 MILLIMETERS NOMINAL MM
thread_length	19.58 MILLIMETERS MINIMUM AND 20.42 MILLIMETERS MAXIMUM MM
screw_material	STEEL
fastener_length	19.58 MILLIMETERS MINIMUM AND 20.42 MILLIMETERS MAXIMUM MM
hardness_rating	18.0 ROCKWELL C MINIMUM AND 31.0 ROCKWELL C MAXIMUM OVERALL
special_features	MRAP
thread_direction	RIGHT-HAND
NSN	5305-01-155-5437

COMPONENT DIAGRAM

KEY FEATURES

•

HEAD HEIGHT: 10.5 MILLIMETERS NOMINAL MM

•

FASTENER LENGTH: 30.00 MILLIMETERS NOMINAL MM

•

THREAD LENGTH: 26.0 MILLIMETERS MINIMUM AND 30.0 MILLIMETERS MAXIMUM MM

•

HARDNESS RATING: 18.0 ROCKWELL C MINIMUM AND 31.0 ROCKWELL C MAXIMUM OVERALL

•

NOMINAL THREAD DIAMETER: 12.0 MILLIMETERS MM

•

HEAD STYLE: HEXAGON

•

THREAD DIRECTION: RIGHT-HAND

•

WIDTH BETWEEN FLATS: 24.0 MILLIMETERS NOMINAL MM

TECHNICAL CHARACTERISTICS

HEAD HEIGHT	10.5 MILLIMETERS NOMINAL MM
FASTENER LENGTH	30.00 MILLIMETERS NOMINAL MM
THREAD LENGTH	26.0 MILLIMETERS MINIMUM AND 30.0 MILLIMETERS MAXIMUM MM
HARDNESS RATING	18.0 ROCKWELL C MINIMUM AND 31.0 ROCKWELL C MAXIMUM OVERALL
NOMINAL THREAD DIAMETER	12.0 MILLIMETERS MM
HEAD STYLE	HEXAGON
THREAD DIRECTION	RIGHT-HAND
WIDTH BETWEEN FLATS	24.0 MILLIMETERS NOMINAL MM
SPECIAL FEATURES	THREAD PITCH IN MILLIMETERS IS 1.75
SURFACE TREATMENT	ZINC OVERALL

SUBSTITUTES & CROSS-REFERENCES 3

DIN933-M12X30-8.8-A3LReference document

Same NSN cross-reference

Reference document — Secondary reference

91000100Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

ISO4017M12X30-8.8-A3LSame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy ISO4017?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is ISO4017?

ISO4017 is a SCREW,CAP,HEXAGON HEAD.

What parts can replace ISO4017?

There are 3 known substitutes for ISO4017: DIN933-M12X30-8.8-A3L, 91000100, ISO4017M12X30-8.8-A3L. Substitute compatibility should be verified for your specific system.

What is the NSN for ISO4017?

ISO4017 is cataloged in the U.S. Government catalog under NSN 5305-01-155-5437. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

ISO4017 — SCREW,CAP,HEXAGON HEAD

Request a Quote — ISO4017