PartsTable
Technical Data Sheet
Download PDF

ISO-1136 — HINGE,BUTT

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

ISO-1136: HINGE,BUTT.

The HINGE,BUTT is a the manufacturer industrial component. Key specifications include material: UNABLE TO DECODE, body_width: 2.0 INCHES NOMINAL IN, knuckle_type: FRICTION, pin_diameter: 0.25 INCHES NOMINAL IN, overall_length: 12.0 INCHES NOMINAL IN, knuckle_quantity: 12. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-662-6638, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ISO-1136
NSN: 5340-01-662-6638
FSC: 5340 — Hardware, Commercial
CAGE: 55242 — ISOMETRICS INC (USA)
SPECIFICATIONS
materialUNABLE TO DECODE
body_width2.0 INCHES NOMINAL IN
knuckle_typeFRICTION
pin_diameter0.25 INCHES NOMINAL IN
overall_length12.0 INCHES NOMINAL IN
knuckle_quantity12
performance_typeNOT RATED
pin_removabilityNONREMOVABLE
style_designatorBUTT
material_thickness0.090 INCHES NOMINAL IN
reversible_featureINCLUDED
mounting_hole_diameter0.190 INCHES NOMINAL IN
NSN5340-01-662-6638
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: ISO-1136 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PIN DIAMETER: 0.25 INCHES NOMINAL IN
•
REVERSIBLE FEATURE: INCLUDED
•
BODY WIDTH: 2.0 INCHES NOMINAL IN
•
STYLE DESIGNATOR: BUTT
•
MOUNTING HOLE DIAMETER: 0.190 INCHES NOMINAL IN
•
PIN CENTER TO BODY EDGE DISTANCE: 2.0 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.090 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
PIN DIAMETER0.25 INCHES NOMINAL IN
REVERSIBLE FEATUREINCLUDED
BODY WIDTH2.0 INCHES NOMINAL IN
STYLE DESIGNATORBUTT
MOUNTING HOLE DIAMETER0.190 INCHES NOMINAL IN
OVERALL LENGTH12.0 INCHES NOMINAL IN
PIN CENTER TO BODY EDGE DISTANCE2.0 INCHES NOMINAL IN
MATERIAL THICKNESS0.090 INCHES NOMINAL IN
PIN REMOVABILITYNONREMOVABLE
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH2.0 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
1658A213Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy ISO-1136?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ISO-1136?
ISO-1136 is a HINGE,BUTT.
What parts can replace ISO-1136?
There is 1 known substitute for ISO-1136: 1658A213. Substitute compatibility should be verified for your specific system.
What is the NSN for ISO-1136?
ISO-1136 is cataloged in the U.S. Government catalog under NSN 5340-01-662-6638. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ISO-1136

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.