PartsTable
Technical Data Sheet
Download PDF

ISO 3601-027 70EP — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

ISO 3601-027 70EP: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER ETHYLENE-PROPYLENE-DIENE CLASS EPDM, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, center_hole_diameter: 32.77 MILLIMETERS MINIMUM AND 33.33 MILLIMETERS MAXIMUM MM, cross-sectional_height: 1.698 MILLIMETERS MINIMUM AND 2.058 MILLIMETERS MAXIMUM MM, end_item_identification: O-RING, part_name_assigned_by_controlling_agency: 5855-01-722-5728. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-729-6034, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ISO 3601-027 70EP
NSN: 5331-01-729-6034
FSC: 5331 — O-ring
CAGE: 62351 — APPLE RUBBER PRODUCTS, INC. DBA APPLE RUBBER PRODUCTS INC (USA)
SPECIFICATIONS
materialRUBBER ETHYLENE-PROPYLENE-DIENE CLASS EPDM
hardness_rating70.0 SHORE DUROMETER A NOMINAL
center_hole_diameter32.77 MILLIMETERS MINIMUM AND 33.33 MILLIMETERS MAXIMUM MM
cross-sectional_height1.698 MILLIMETERS MINIMUM AND 2.058 MILLIMETERS MAXIMUM MM
end_item_identificationO-RING
part_name_assigned_by_controlling_agency5855-01-722-5728
NSN5331-01-729-6034
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: ISO 3601-027 70EP MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 1.698 MILLIMETERS MINIMUM AND 2.058 MILLIMETERS MAXIMUM MM
•
HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL
•
CENTER HOLE DIAMETER: 32.77 MILLIMETERS MINIMUM AND 33.33 MILLIMETERS MAXIMUM MM
•
MATERIAL: RUBBER ETHYLENE-PROPYLENE-DIENE CLASS EPDM
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT1.698 MILLIMETERS MINIMUM AND 2.058 MILLIMETERS MAXIMUM MM
HARDNESS RATING70.0 SHORE DUROMETER A NOMINAL
CENTER HOLE DIAMETER32.77 MILLIMETERS MINIMUM AND 33.33 MILLIMETERS MAXIMUM MM
PART NAME ASSIGNED BY CONTROLLING AGENCY5855-01-722-5728
END ITEM IDENTIFICATIONO-RING
MATERIALRUBBER ETHYLENE-PROPYLENE-DIENE CLASS EPDM
SUBSTITUTES & CROSS-REFERENCES 1
13115351Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedAcquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy ISO 3601-027 70EP?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ISO 3601-027 70EP?
ISO 3601-027 70EP is a O-RING.
What parts can replace ISO 3601-027 70EP?
There is 1 known substitute for ISO 3601-027 70EP: 13115351. Substitute compatibility should be verified for your specific system.
What is the NSN for ISO 3601-027 70EP?
ISO 3601-027 70EP is cataloged in the U.S. Government catalog under NSN 5331-01-729-6034. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ISO 3601-027 70EP