PartsTable
Technical Data Sheet
Download PDF

IPS0305DL — SEAL,PLAIN ENCASED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

IPS0305DL: SEAL,PLAIN ENCASED.

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CASE, seal_width: 0.351 INCHES MINIMUM AND 0.359 INCHES MAXIMUM IN, special_features: OPERATING TEMPERATURE 300 DEG. F MAX.; PRESSURE TO BE SEALED 5 P.S.I,, end_item_identification: TX100-1 TRANSMISSION, accommodated_shaft_diameter: 2.375 INCHES NOMINAL IN, part_name_assigned_by_controlling_agency: OIL SEAL, DOUBLE LIP.

This part is cataloged in the U.S. Government catalog under NSN 5330-01-525-1727, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
IPS0305DL
NSN: 5330-01-525-1727
FSC: 5330 — Packing and Gasket Materials
CAGE: 0MVG5 — INTERNATIONAL PARTS SUPPLY CORPORATION DBA INTERNATIONAL PARTS SUPPLY CORP (USA)
SPECIFICATIONS
materialSTEEL CASE
seal_width0.351 INCHES MINIMUM AND 0.359 INCHES MAXIMUM IN
special_featuresOPERATING TEMPERATURE 300 DEG. F MAX.; PRESSURE TO BE SEALED 5 P.S.I,
end_item_identificationTX100-1 TRANSMISSION
accommodated_shaft_diameter2.375 INCHES NOMINAL IN
part_name_assigned_by_controlling_agencyOIL SEAL, DOUBLE LIP
NSN5330-01-525-1727
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: IPS0305DL MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.351 INCHES MINIMUM AND 0.359 INCHES MAXIMUM IN
•
ACCOMMODATED SHAFT DIAMETER: 2.375 INCHES NOMINAL IN
•
MATERIAL: STEEL CASE
TECHNICAL CHARACTERISTICS
SEAL WIDTH0.351 INCHES MINIMUM AND 0.359 INCHES MAXIMUM IN
SPECIAL FEATURESOPERATING TEMPERATURE 300 DEG. F MAX.; PRESSURE TO BE SEALED 5 P.S.I,
ACCOMMODATED SHAFT DIAMETER2.375 INCHES NOMINAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCYOIL SEAL, DOUBLE LIP
END ITEM IDENTIFICATIONTX100-1 TRANSMISSION
MATERIALSTEEL CASE
MATERIALRUBBER SILICONE CLASS Q SEALING ELEMENT B
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy IPS0305DL?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is IPS0305DL?
IPS0305DL is a SEAL,PLAIN ENCASED.
What is the NSN for IPS0305DL?
IPS0305DL is cataloged in the U.S. Government catalog under NSN 5330-01-525-1727. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — IPS0305DL