PartsTable
Technical Data Sheet
Download PDF

IPD9M6293 — LOCKING PLATE,NUT AND BOLT

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

IPD9M6293: LOCKING PLATE,NUT AND BOLT.

The LOCKING PLATE,NUT AND BOLT is a the manufacturer industrial component. Key specifications include material: STEEL, ear_width: 0.500 INCHES NOMINAL IN, body_width: 0.463 INCHES NOMINAL IN, plate_thickness: 0.036 INCHES NOMINAL IN, aperture_diameter: 1.754 INCHES NOMINAL IN, bolt_circle_diameter: 2.281 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-116-0431, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
IPD9M6293
NSN: 5340-00-116-0431
FSC: 5340 — Hardware, Commercial
CAGE: 55883 — INDUSTRIAL PARTS DEPOT, LLC DBA IPD (USA)
SPECIFICATIONS
materialSTEEL
ear_width0.500 INCHES NOMINAL IN
body_width0.463 INCHES NOMINAL IN
plate_thickness0.036 INCHES NOMINAL IN
aperture_diameter1.754 INCHES NOMINAL IN
bolt_circle_diameter2.281 INCHES NOMINAL IN
mounting_hole_diameter0.282 INCHES NOMINAL IN
angle_between_ears_in_deg125.0
cross-sectional_shape_styleFLAT
NSN5340-00-116-0431
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: IPD9M6293 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PLATE THICKNESS: 0.036 INCHES NOMINAL IN
•
ANGLE BETWEEN EARS IN DEG: 125.0
•
BODY WIDTH: 0.463 INCHES NOMINAL IN
•
MOUNTING HOLE DIAMETER: 0.282 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: FLAT
•
APERTURE DIAMETER: 1.754 INCHES NOMINAL IN
•
BOLT CIRCLE DIAMETER: 2.281 INCHES NOMINAL IN
•
MATERIAL: STEEL
TECHNICAL CHARACTERISTICS
PLATE THICKNESS0.036 INCHES NOMINAL IN
ANGLE BETWEEN EARS IN DEG125.0
BODY WIDTH0.463 INCHES NOMINAL IN
MOUNTING HOLE DIAMETER0.282 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEFLAT
APERTURE DIAMETER1.754 INCHES NOMINAL IN
BOLT CIRCLE DIAMETER2.281 INCHES NOMINAL IN
MATERIALSTEEL
EAR WIDTH0.500 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
9M6293-00Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy IPD9M6293?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is IPD9M6293?
IPD9M6293 is a LOCKING PLATE,NUT AND BOLT.
What parts can replace IPD9M6293?
There is 1 known substitute for IPD9M6293: 9M6293-00. Substitute compatibility should be verified for your specific system.
What is the NSN for IPD9M6293?
IPD9M6293 is cataloged in the U.S. Government catalog under NSN 5340-00-116-0431. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — IPD9M6293

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.